Heos

Heos by Denon comprises a set of HiFi audio systems integrated with HSYCO via WiFi or Ethernet connection. A single HEOS I/O Server controls all the devices connected to the local network.

The driver has been tested on firmware version 1.289.95 of the HEOS devices.

Communication

Just make sure the Heos devices are connected to the same local network as HSYCO server is.

HSYCO Configuration

Add a HEOS I/O Server in the I/O Servers section of the Settings and set its parameters:

High Availability

• User: username for the HEOS account (optional)
• Password: password for the HEOS account (if User is provided)
• Shutdown when inactive: defaults to false.

Options

ID	Default	Values	Description
startupevents	false	true	generate IO events also during the driver’s start-up phase
		false	start generating events only after HSYCO is aligned with the current status of the system

Datapoints

In the following table, replace <name> with the name assigned to each player. Names are transformed to lowercase and spaces are replaced by '-'. For instance, if the name assigned to a player is "Example Name", the <name> part of the corresponding datapoints will be "example-name".

ID	Value	R/W	Description
connection	online	R	connection established
	offline	R	HSYCO can't connect to the device
<name>.model	<model_name>	R	reports the model name of this player, e.g. "HEOS 3"
<name>.version	<version_number>	R	reports the version number of this player, e.g. "1.289.95"
<name>.state	play	R	the audio is playing
	pause	R	the audio is paused
	stop	R	the audio is stopped

User Interface

UISET Actions

ID	Attribute	Set to
connection	visible	true	when datapoint connection = offline
		false	when datapoint connection = online

USER Commands

Name	Param	Action

Release Notes

3.5.0

• initial release

---

Heos and Denon are registered trademarks of D&M Holdings, Inc.