Ats

From HSYCO
Revision as of 09:48, 10 January 2014 by Hsyco (talk | contribs) (Created page with "Aritech ATS panels are multi-area intrusion detection systems. The integration with HSYCO can be accomplished via direct control through the RS-232 port on the serial module. ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Aritech ATS panels are multi-area intrusion detection systems. The integration with HSYCO can be accomplished via direct control through the RS-232 port on the serial module.

Communication

Employ an RS-232 cable to connect the panel directly to HSYCO or to an Ethernet/RS-232 gateway. The cable must follow this pinout diagram:

Ats RS232 cable.png

RS-232 parameters:

Baud rate same as panel settings (default 4800)
Data bits 8
Stop bit 1
Parity none
Flow control RTS/CTS
Retrieved from "https://wiki.hsyco.com/3.8/index.php?title=Ats&oldid=837"