IonoPiMax

Iono Pi Max is an extremely versatile industrial server with a huge variety of Input/Output lines and standard communication interfaces, all routed to the incredibly powerful quad-core processor of the Raspberry Pi.

iono Pi

This driver provides support for a local installation of HSYCO on Iono Pi Max itself.

HSYCO Configuration

Add a IONO Pi Max I/O Server in the I/O Servers section of the Settings and set its parameters:

Note that the IONO Pi Max I/O Server doesn't count in the I/O servers license total, so you don't need an extra I/O Server license to use IONO Pi Max with HSYCO.

Communication

• IP Address: the IP address assigned to Iono Pi, leave blank for a local installation;
• Port: TCP port configured on Iono Pi, leave blank for a local installation;

High Availability

• Shutdown when inactive: defaults to false.

Options

ID	Default	Values	Description
startupevents	false	true	generate IO events also during the driver’s start-up phase
		false	start generating events only after HSYCO is aligned with the current status of the system
pollinterval	250	10 <= n <= 30000	the data acquisition interval, in milliseconds

Datapoints

ID	Value	R/W	Description
connection	online	R	connection established
	offline	R	HSYCO can't connect to the device
driverstate	init	R	Sfera driver is initializing
	quit	R	Sfera driver quit
	running	R	Sfera driver is running (normal state)
led	0	R	LED L1 is off
		W	turn LED L1 off
	1	R	LED L1 is on
		W	turn LED L1 on
o<1-4>	0	R	relay <1-4> is off
		W	switch off relay <1-4>
	1	R	relay <1-4> is on
		W	switch on relay <1-4>
oc<1-3>	0	R	open collector output <1-3> is off (not grounded)
		W	switch off open collector output <1-3>
	1	R	open collector output <1-3> is on (grounded)
		W	switch on open collector output <1-3>
di<1-6>	0	R	digital input <1-6> is low
	1	R	digital input <1-6> is high
ai<1-4>	<val>	R	analog input <1-4> is reading a voltage equal to <val> (in Volts)
wiegand.<1-2>	<val>	R	if option "wiegandbits" set to false. Value as an unsigned integer in base 16 (hex) read on the specified Wiegand interface (e.g. "2c646a2")
	<bits>/<val>	R	if option "wiegandbits" set to true. Number of bits and value (hex) read on the specified Wiegand interface (e.g. "26/2c646a2")
onewire.bus.<id>	<val>	R	1-Wire device <id> value

User Interface

To control a digital output (O1 ... O4, OC1 ... OC3, LED), add a button or a buttonicon object to your project page and set its address field to the corresponding datapoint:

Release Notes

3.7.0

• initial release

---

Iono Pi Max is a registered trademark of Sfera Labs Srl