Difference between revisions of "Cle"
Jump to navigation
Jump to search
| Line 5: | Line 5: | ||
This is the complete list of supported modules: | This is the complete list of supported modules: | ||
| − | Thermostats (various models, articles MCT5, MCT6, MCU5, MCU6) installed as TermoA and B | + | Thermostats (various models, articles MCT5, MCT6, MCU5, MCU6) installed as TermoA and B |
Internal pocket (article MTS3) installed as MTS A and MTS B | Internal pocket (article MTS3) installed as MTS A and MTS B | ||
Revision as of 13:04, 5 April 2023
Cle is an I/O servers that allows the supervision of CLE automation hotel management modules.
This driver complies with the Xcom communication protocol
This is the complete list of supported modules:
Thermostats (various models, articles MCT5, MCT6, MCU5, MCU6) installed as TermoA and B
Internal pocket (article MTS3) installed as MTS A and MTS B
External "out of the door" reader (article MFP, PRX) or integrated on the control panel
(Wireless receiver article WRX only presence)
(Safe article CSF only presence)
Communication
The driver supports communication through RS-485 serial interface.
RS-485 parameters:
| Baud rate | <19200-57600> |
| Data bits | 8 |
| Stop bit | 1 |
| Parity | none |
| Flow control | none |
Datapoints
| ID | INDEX | R/W | VALUE | VALUE MEANING | INFO (ITA) | INFO (ENG) |
|---|---|---|---|---|---|---|
| cle.<addr>.digital.output.<x>.value | <x>: 1..8 | W | Val: 0,1 | Controlla uscita digitale X | Check digital output X | |
| cle.<addr>.digital.input.reset | W | Val: 1 | 1 = reset | Resetta tutti gli ingressi digitali | Reset all digital inputs | |
| cle.<addr>.digital.input.<x>.reset | <x>: 1..8 | W | Val: 1 | 1 = reset | Resetta ingressi digitali X | Reset digital input X |
| cle.<addr>.settings.reset | W | Val: 1 | 1 = reset | Resetta impostazioni plugin | Reset plugin settings | |
| cle.<addr>.digital.input.<x>.name | <x>: 1..8 | W | Val: string | Cambia il nome all’ingresso digitale | Change name of digital input | |
| cle.<addr>.digital.output.<x>.name | <x>: 1..8 | W | Val: string | Cambia il nome all’uscita | Change name of output | |
| cle.<addr>.<mct>.name | <mct>: mcta,mctb | W | Val: string | Cambia il nome al termostato | Change name of thermostat | |
| cle.<addr>.<mct>.season | <mct>: mcta,mctb | W | Val: summer, winter | Modifica stagione termostato | Modify thermostat season | |
| cle.<addr>.<mct>.temp.anti.freeze | <mct>: mcta,mctb | W | Val: integer | Modifica setpoint antigelo | Modify anti-freeze setpoint | |
| cle.<addr>.<mct>.temp.comfort | <mct>: mcta,mctb | W | Val: integer | Modifica setpoint comfort | Modify comfort setpoint | |
| cle.<addr>.<mct>.temp.maintenance | <mct>: mcta,mctb | W | Val: integer | Modifica setpoint manutenzione | Modify maintenance setpoint | |
| cle.<addr>.<mct>.temp.maintenance.max | <mct>: mcta,mctb | W | Val: integer | Modifica setpoint max manutenzione | Modify max maintenance setpoint | |
| cle.<addr>.<mct>.temp.max | <mct>: mcta,mctb | W | Val: integer | Modifica setpoint max | Modify max setpoint | |
| cle.<addr>.<mct>.temp.min | <mct>: mcta,mctb | W | Val: integer | Modifica setpoint min | Modify min setpoint | |
| cle.<addr>.<mct>.flag.maintenance.or.comfort | <mct>: mcta,mctb | W | Val: maintenance, comfort | Imposta MCT in manutenzione o comfort | Set MCT to maintenance or comfort | |
| cle.<addr>.online | R | Val: 0,1 | 1=online | Stato connessione bus | Bus connection status | |
| cle.<addr>.aux.digital.input.<x>.disabled | <x>: 1..8 | R | Val: 0,1 | 1=disabled | ||
| cle.<addr>.card.<number>.enabled | R | Usati da plugin, non usare | Used by plugin, do not use | |||
| cle.<addr>.card.new.code | R | Usati da plugin, non usare | Used by plugin, do not use | |||
| cle.<addr>.card.new.enable | R | Usati da plugin, non usare | Used by plugin, do not use | |||
| cle.<addr>.date.time.byte.data | R | Usati da plugin, non usare | Used by plugin, do not use | |||
| cle.<addr>.date.time.day | R | Usati da plugin, non usare | Used by plugin, do not use | |||
| cle.<addr>.date.time.daylight.savings.time | R | Usati da plugin, non usare | Used by plugin, do not use | |||
| cle.<addr>.date.time.error | R | Usati da plugin, non usare | Used by plugin, do not use | |||
| cle.<addr>.date.time.hour | R | Val:0..23 | Usati da plugin, non usare | Used by plugin, do not use | ||
| cle.<addr>.date.time.minute | R | Val:1.59 | Usati da plugin, non usare | Used by plugin, do not use | ||
| cle.<addr>.date.time.month | R | Val:1..12 | Usati da plugin, non usare | Used by plugin, do not use | ||
| cle.<addr>.date.time.second | R | Val:1.59 | Usati da plugin, non usare | Used by plugin, do not use | ||
| cle.<addr>.date.time.week.day | R | Val:1..7 | Usati da plugin, non usare | Used by plugin, do not use | ||
| cle.<addr>.date.time.year | R | Val:last two digits of current year | Usati da plugin, non usare | Used by plugin, do not use | ||
| cle.<addr>.digital.input.<x>.normally.open | <x>: 1..8 | R | Val: 0,1 | 1=NA | Se l’ingresso digitale X è normalmente aperto | If digital input X is normally open |
| cle.<addr>.digital.input.<x>.retentive | <x>: 1..8 | R | Val: 0,1 | 1=latching | Se l’ingresso digitale X è ritentivo | Digital input X status is latching |
| cle.<addr>.digital.input.<x>.value | <x>: 1..8 | R | Val: 0,1 | 1=close | Stato dell’ingresso digitale X | Indicate if output X is linked to digital input Y |
| cle.<addr>.digital.output.<x>.bind.di<y> | <x>: 1..8 - <y>: 1..8 | R | Val: 0,1 | 1=binded | Indica se l’uscita X è legata all’ingresso digitale Y | |
| cle.<addr>.digital.output.<x>.bind.virtual.input.incma | <x>: 1..8 | R | Val: 0,1 | 1=binded | Indica se l’uscita X è legata alll’input virtuale incma | Indicate if output X is linked to virtual input incma |
| cle.<addr>.digital.output.<x>.bind.virtual.input.incmb | <x>: 1..8 | R | Val: 0,1 | 1=binded | Indica se l’uscita X è legata alll’input virtuale incmb | Indicate if output X is linked to virtual input incmb |
| cle.<addr>.digital.output.<x>.disabled | <x>: 1..8 | R | Val: 0,1 | 1=disabled | Uscita X disabilitata | Output X disabled |
| cle.<addr>.digital.output.<x>.inputs.mode | <x>: 1..8 | R | Val: and,or | |||
| cle.<addr>.digital.output.<x>.normally.open | <x>: 1..8 | R | Val: 0,1 | 1=NA | Uscita X normalmente aperta | Output X normally open |
| cle.<addr>.digital.output.<x>.type | <x>: 1..8 | R | Val: timerized,monostable,bistable | Tipo dell’uscita X | Type of output X | |
| cle.<addr>.digital.output.<x>.value | <x>: 1..8 | R | Val: 0,1 | 1=close | Stato dell’uscita X | Status of output X |
| cle.<addr>.esxj4r_a.exists | R | Val: 0,1 | 1=exists | |||
| cle.<addr>.esxj4r_a.offline | R | Val: 0,1 | 1=offline | |||
| cle.<addr>.esxj4r_b.exists | R | Val: 0,1 | 1=exists | |||
| cle.<addr>.esxj4r_b.offline | R | Val: 0,1 | 1=offline | |||
| cle.<addr>.esxj4r_c.exists | R | Val: 0,1 | 1=exists | |||
| cle.<addr>.esxj4r_c.offline | R | Val: 0,1 | 1=offline | |||
| cle.<addr>.esxy4.exists | R | Val: 0,1 | 1=exists | |||
| cle.<addr>.esxy4.offline | R | Val: 0,1 | 1=offline | |||
| cle.<addr>.firmware.name | R | Val: string | Nome del firmware installato sul modulo hotel | Firmware name installed on hotel module | ||
| cle.<addr>.firmware.release | R | Val: string | Release del firmware installato sul modulo hotel | Firmware release installed on hotel module | ||
| cle.<addr>.firmware.version | R | Val: string | Versione del firmware installato sul modulo hotel | Firmware version installed on hotel module | ||
| cle.<addr>.function.anti.intrusion.insertion | R | Val: manual,automatc | ||||
| cle.<addr>.function.anti.theft.active | R | Val: 0,1 | 1=active | Stato antifurto | Anti-theft status | |
| cle.<addr>.function.call.cleaner.active | R | Val: 0,1 | 1=active | Stato chiamata pulizia camera | Housekeeping call status | |
| cle.<addr>.function.dbk.active | R | Val: 0,1 | ||||
| cle.<addr>.function.door.open.without.card.in.pouch.active | R | Val: 0,1 | 1=active | Porta camera aperta e tessera non presente nella tasca | Room door open and keycard not present | |
| cle.<addr>.function.fc8.active | R | Val: 0,1 | ||||
| cle.<addr>.function.intrusion.alarm.active | R | Val: 0,1 | ||||
| cle.<addr>.function.maintenance.request.active | R | Val: 0,1 | 1=active | Allarme antifurto | Alarm activated | |
| cle.<addr>.function.not.disturb.active | R | Val: 0,1 | 1=active | Do not Disturb attivato | Do Not Disturb mode activated | |
| cle.<addr>.function.pouch.input.simulation.active | R | Val: 0,1 | 1=active | Simulazione ingresso tasca attivato | "Pocket entry simulation activated | |
| cle.<addr>.function.programming.authorization.active | R | Val: 0,1 | ||||
| cle.<addr>.function.room.checked.and.ready.active | R | Val: 0,1 | 1=active | Stanza pronta e effettuato check-in | Room ready and check-in done | |
| cle.<addr>.function.room.checked.not.ready.active | R | Val: 0,1 | 1=active | Stanza non pronta | Room not ready | |
| cle.<addr>.function.room.cleaning.request.active | R | Val: 0,1 | 1=active | Richiesta pulizia camera attiva | Housekeeping request active | |
| cle.<addr>.function.room.maintance.done.and.ready.active | R | Val: 0,1 | 1=active | Manutenzione camera effettuata | Room maintenance done | |
| cle.<addr>.function.room.maintance.done.not.ready.active | R | Val: 0,1 | 1=active | Manutenzione camera non effettuata | Room maintenance not done | |
| cle.<addr>.function.room.ready.active | R | Val: 0,1 | 1=active | Stanza pronta | Room ready | |
| cle.<addr>.function.serial.bus.alarm.simulation.active | R | Val: 0,1 | 1=active | Simulazione allarme sul bus seriale | Serial bus alarm simulation activated | |
| cle.<addr>.function.sos.active | R | Val: 0,1 | 1=active | Funzione SOS attivata | SOS function activated | |
| cle.<addr>.function.st43.active | R | Val: 0,1 | 1=active | |||
| cle.<addr>.function.st44.active | R | Val: 0,1 | 1=active | |||
| cle.<addr>.function.stac.active | R | Val: 0,1 | 1=active | |||
| cle.<addr>.function.stad.active | R | Val: 0,1 | 1=active | |||
| cle.<addr>.function.starc.active | R | Val: 0,1 | 1=active | |||
| cle.<addr>.function.stard.active | R | Val: 0,1 | 1=active | |||
| cle.<addr>.function.stc.active | R | Val: 0,1 | 1=active | |||
| cle.<addr>.function.std.active | R | Val: 0,1 | 1=active | |||
| cle.<addr>.function.wd43.active | R | Val: 0,1 | 1=active | |||
| cle.<addr>.function.wd44.active | R | Val: 0,1 | 1=active | |||
| cle.<addr>.function.wdc.active | R | Val: 0,1 | 1=active | |||
| cle.<addr>.function.wdd.active | R | Val: 0,1 | 1=active | |||
| cle.<addr>.mcb.exists | R | Val: 0,1 | 1=exists | MCB esiste | MCB exists | |
| cle.<addr>.mcb.offline | R | Val: 0,1 | 1=offline | MCB offline | MCB offline | |
| cle.<addr>.<mct>.exists | <mct>: mcta,mctb | R | Val: 0,1 | 1=esiste | MCT esiste | MCT exists |
| cle.<addr>.<mct>.fancoil.speed | <mct>: mcta,mctb | R | Val: automatic, off or number | Modo fancoil | Fan coil mode | |
| cle.<addr>.<mct>.flag.actuator.work.mode | <mct>: mcta,mctb | R | Val: remoteoff,localoff,aautomatic,chrono | Velocità fancoil | Fan coil speed | |
| cle.<addr>.<mct>.flag.auto.summer.winter.commutation | <mct>: mcta,mctb | R | Val: 0,1 | 1=automatic | Commutazione estate inverno automatica | Automatic summer/winter switch |
| cle.<addr>.<mct>.flag.datetime.error | <mct>: mcta,mctb | R | Val: 0,1 | 1=error | Errore data | Date error |
| cle.<addr>.<mct>.flag.display.intensity.included | <mct>: mcta,mctb | R | Val: 0,1 | |||
| cle.<addr>.<mct>.flag.electrovalve.work.mode | <mct>: mcta,mctb | R | Val: regular,setpoint | |||
| cle.<addr>.<mct>.flag.external.sensor.fault | <mct>: mcta,mctb | R | Val: 0,1 | 1=error | Errore sensore temperatura esterno | External temperature sensor error |
| cle.<addr>.<mct>.flag.external.sensor.temp.anomaly | <mct>: mcta,mctb | R | Val: 0,1 | 1=error | Anomalia sensore temperatura esterno | External temperature sensor anomaly |
| cle.<addr>.<mct>.flag.fahrenheit.or.celsius | <mct>: mcta,mctb | R | Val:fahrenheit,celsius | |||
| cle.<addr>.<mct>.flag.internal.sensor.fault | <mct>: mcta,mctb | R | Val: 0,1 | Errore sensore temperatura interno | Internal temperature sensor error | |
| cle.<addr>.<mct>.flag.internal.sensor.temp.anomaly | <mct>: mcta,mctb | R | Val: 0,1 | Anomalia sensore temperatura interno | Internal temperature sensor anomaly | |
| cle.<addr>.<mct>.flag.ir.input.function.b.enabled | <mct>: mcta,mctb | R | Val: 0,1 | |||
| cle.<addr>.<mct>.flag.ir.status | <mct>: mcta,mctb | R | Val: 0,1 | |||
| cle.<addr>.<mct>.flag.is.winter | <mct>: mcta,mctb | R | Val: 0,1 | 1=winter | E’ inverno? | Is it winter? |
| cle.<addr>.<mct>.flag.keypad.locked | <mct>: mcta,mctb | R | Val: 0,1 | 1=active | Blocco keypad | Keypad lock |
| cle.<addr>.<mct>.flag.normally.closed.contact.window | <mct>: mcta,mctb | R | Val: 0,1 | 1=NC | Contatto finestra normalmente chiuso | Normally closed window contact |
| cle.<addr>.<mct>.flag.pgm.allow | <mct>: mcta,mctb | R | Val: 0,1 | |||
| cle.<addr>.<mct>.flag.rsir1.function.b.enabled | <mct>: mcta,mctb | R | Val: 0,1 | |||
| cle.<addr>.<mct>.flag.window.open | <mct>: mcta,mctb | R | Val: 0,1 | 1=open | Finestra aperta | Window open |
| cle.<addr>.<mct>.flag.window.open.control.included | <mct>: mcta,mctb | R | Val: 0,1 | 1=included | Controllo finestra aperta | Window open check |
| cle.<addr>.<mct>.flag.wrx.auto.learning | <mct>: mcta,mctb | R | Val: 0,1 | |||
| cle.<addr>.<mct>.keypad.event | <mct>: mcta,mctb | R | Val:click,down,up | Evento dal keypad | Keypad event | |
| cle.<addr>.<mct>.keypad.event.data | <mct>: mcta,mctb | R | Val: plus, minus, fan, manu,cr | Tipo di dato inviato dal keypad | Data type sent from keypad | |
| cle.<addr>.<mct>.offline | <mct>: mcta,mctb | R | Val: 0,1 | 1=offline | Offline | Offline |
| cle.<addr>.<mct>.percentage.pi | <mct>: mcta,mctb | R | Val: 0,100 | Percentuale di apertura della valvola | Valve opening percentage | |
| cle.<addr>.<mct>.relay.<x>.active | <mct>: mcta,mctb, <x>: 1..8 | R | Val: 0,1 | 1=active | Relè X attivo o no | Relay X active or not |
| cle.<addr>.<mct>.temp.actual | <mct>: mcta,mctb | R | Val: yy.zzzz | Es: 22.3456 Temperatura corrente della stanza | Ex: 22.3456 Current room temperature | |
| cle.<addr>.<mct>.temp.setpoint | <mct>: mcta,mctb | R | Val: integer | Temperature di setpoint della stanza | Room setpoint temperature | |
| cle.<addr>.<mfp>.card.code | <mfp>: mfpa,mfpb | R | Val: integer | Codice carta presente nella MFP | Code card present in MFP | |
| cle.<addr>.<mfp>.card.dnd | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=active | Carta non disturbare presente | Do Not Disturb card present |
| cle.<addr>.<mfp>.card.due.day | <mfp>: mfpa,mfpb | R | Val: 0..31 | Giorno di scadenza carta | Card expiration day | |
| cle.<addr>.<mfp>.card.due.hour | <mfp>: mfpa,mfpb | R | Val:0..23 | Ora di scadenza carta | Card expiration time | |
| cle.<addr>.<mfp>.card.due.month | <mfp>: mfpa,mfpb | R | Val:1..12 | Mese di scadenza carta | Card expiration month | |
| cle.<addr>.<mfp>.card.due.year | <mfp>: mfpa,mfpb | R | Val:last two digits of current year | Anno di scadenza carta | Card expiration year | |
| cle.<addr>.<mfp>.card.level | <mfp>: mfpa,mfpb | R | Val: integer | Livello carta inserita in MFP | Card level inserted in MFP | |
| cle.<addr>.<mfp>.card.reader.validity | <mfp>: mfpa,mfpb | R | Val: enabled, disabled, outoftime, clientinroom, cardexpired,abdisabled,safeopen | Tipo validità carta inserita in MFP | Validity type of card inserted in MFP | |
| cle.<addr>.<mfp>.card.slot<x> | <mfp>: mfpa,mfpb - <x>: 1..5 | R | Val: 0,1 | 1=active | ||
| cle.<addr>.<mfp>.excluded.festivity | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=disabled | ||
| cle.<addr>.<mfp>.excluded.friday | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=disabled | ||
| cle.<addr>.<mfp>.excluded.monday | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=disabled | ||
| cle.<addr>.<mfp>.excluded.saturday | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=disabled | ||
| cle.<addr>.<mfp>.excluded.sunday | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=disabled | ||
| cle.<addr>.<mfp>.excluded.thursday | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=disabled | ||
| cle.<addr>.<mfp>.excluded.tuesday | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=disabled | ||
| cle.<addr>.<mfp>.excluded.wednesday | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=disabled | ||
| cle.<addr>.<mfp>.exists | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=exists | MFP esiste o no | MFP exists or not |
| cle.<addr>.<mfp>.flag.card.inserted | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=present | Carta inserita | Card inserted |
| cle.<addr>.<mfp>.flag.card.read.error | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=error | Errore di lettura carta | Card reading error |
| cle.<addr>.<mfp>.flag.card.read.error.different.password | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=error | ||
| cle.<addr>.<mfp>.flag.password.error | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=error | ||
| cle.<addr>.<mfp>.flag.plant.code.error | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=error | ||
| cle.<addr>.<mfp>.led.call.cleaner | <mfp>: mfpa,mfpb | R | Val: on,off,slow,quick | Stato led cleaner | Cleaner LED status | |
| cle.<addr>.<mfp>.led.customer.in.camera | <mfp>: mfpa,mfpb | R | Val: on,off,slow,quick | Stato led cliente nella stanza | Room client LED status | |
| cle.<addr>.<mfp>.led.not.disturb | <mfp>: mfpa,mfpb | R | Val: on,off,slow,quick | Stato led DND | Do Not Disturb LED status | |
| cle.<addr>.<mfp>.led.rejection | <mfp>: mfpa,mfpb | R | Val: on,off,slow,quick | Stato led carta rifiutata | Rejected card LED status | |
| cle.<addr>.<mfp>.led.sos | <mfp>: mfpa,mfpb | R | Val: on,off,slow,quick | Stato led SOS | SOS LED status | |
| cle.<addr>.<mfp>.offline | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=offline | MFP offline o no | MFP offline or not |
| cle.<addr>.<mfp>.plant.code | <mfp>: mfpa,mfpb | R | Val: integer | Codice impianto | System code | |
| cle.<addr>.<mfp>.transit.day | <mfp>: mfpa,mfpb | R | Val:1..31 | |||
| cle.<addr>.<mfp>.transit.hour | <mfp>: mfpa,mfpb | R | Val:0..23 | |||
| cle.<addr>.<mfp>.transit.minute | <mfp>: mfpa,mfpb | R | Val:1..59 | |||
| cle.<addr>.<mfp>.transit.month | <mfp>: mfpa,mfpb | R | Val:1..12 | |||
| cle.<addr>.<mfp>.transit.times | <mfp>: mfpa,mfpb | R | Val: integer | |||
| cle.<addr>.<mfp>.value | <mfp>: mfpa,mfpb | R | Val: 0,1 | |||
| cle.<addr>.pouch.simulation.inputs | R | Val: integer | ||||
| cle.<addr>.scf.exists | R | Val: 0,1 | 1=exists | |||
| cle.<addr>.scf.offline | R | Val: 0,1 | 1=exists | |||
| cle.<addr>.slot<x>.end.hour | <x>: 0..4 | R | Val:0..23 | |||
| cle.<addr>.slot<x>.end.minute | <x>: 0..4 | R | Val:1..59 | |||
| cle.<addr>.slot<x>.start.hour | <x>: 0..4 | R | Val:0..23 | |||
| cle.<addr>.slot<x>.start.minute | <x>: 0..4 | R | Val:1..59 | |||
| cle.<addr>.tr.value | R | Val: integer | ||||
| cle.<addr>.<tsc>.card.code | <tsc>:tsca,tscb | R | Val: integer | Codice carta presenta nella tasca TSC | Code card present in TSC pocket | |
| cle.<addr>.<tsc>.card.dnd | <tsc>:tsca,tscb | R | Val: 0,1 | Carta non disturbare presente | Do Not Disturb card present | |
| cle.<addr>.<tsc>.card.due.day | <tsc>:tsca,tscb | R | Val:1..31 | Giorno di scadenza carta | Card expiration day | |
| cle.<addr>.<tsc>.card.due.hour | <tsc>:tsca,tscb | R | Val:0..23 | Ora di scadenza carta | Card expiration time | |
| cle.<addr>.<tsc>.card.due.month | <tsc>:tsca,tscb | R | Val:1..12 | Mese di scadenza carta | Card expiration month | |
| cle.<addr>.<tsc>.card.due.year | <tsc>:tsca,tscb | R | Val:last two digits of current year | Anno di scadenza carta | Card expiration year | |
| cle.<addr>.<tsc>.card.level | <tsc>:tsca,tscb | R | Val: integer | Livello carta inserita in TSC | Card level inserted in TSC pocket | |
| cle.<addr>.<tsc>.card.reader.validity | <tsc>:tsca,tscb | R | Val: enabled, disabled, outoftime, clientinroom, cardexpired,abdisabled,safeopen | Tipo validità carta inserita in TSC | Validity type of card inserted in TSC pocket | |
| cle.<addr>.<tsc>.card.slot<x> | <tsc>:tsca,tscb - <x>: 1..5" | R | Val: 0,1 | |||
| cle.<addr>.<tsc>.excluded.festivity | <tsc>:tsca,tscb | R | Val: 0,1 | |||
| cle.<addr>.<tsc>.excluded.friday | <tsc>:tsca,tscb | R | Val: 0,1 | |||
| cle.<addr>.<tsc>.excluded.monday | <tsc>:tsca,tscb | R | Val: 0,1 | |||
| cle.<addr>.<tsc>.excluded.saturday | <tsc>:tsca,tscb | R | Val: 0,1 | |||
| cle.<addr>.<tsc>.excluded.sunday | <tsc>:tsca,tscb | R | Val: 0,1 | |||
| cle.<addr>.<tsc>.excluded.thursday | <tsc>:tsca,tscb | R | Val: 0,1 | |||
| cle.<addr>.<tsc>.excluded.tuesday | <tsc>:tsca,tscb | R | Val: 0,1 | |||
| cle.<addr>.<tsc>.excluded.wednesday | <tsc>:tsca,tscb | R | Val: 0,1 | |||
| cle.<addr>.<tsc>.exists | <tsc>:tsca,tscb | R | Val: 0,1 | |||
| cle.<addr>.<tsc>.flag.card.inserted | <tsc>:tsca,tscb | R | Val: 0,1 | |||
| cle.<addr>.<tsc>.flag.card.read.error | <tsc>:tsca,tscb | R | Val: 0,1 | |||
| cle.<addr>.<tsc>.flag.card.read.error.different.password | <tsc>:tsca,tscb | R | Val: 0,1 | |||
| cle.<addr>.<tsc>.flag.password.error | <tsc>:tsca,tscb | R | Val: 0,1 | |||
| cle.<addr>.<tsc>.flag.plant.code.error | <tsc>:tsca,tscb | R | Val: 0,1 | |||
| cle.<addr>.<tsc>.led.arrow | <tsc>:tsca,tscb | R | Val: on,off,slow,quick | |||
| cle.<addr>.<tsc>.led.call.cleaner | <tsc>:tsca,tscb | R | Val: on,off,slow,quick | |||
| cle.<addr>.<tsc>.offline | <tsc>:tsca,tscb | R | Val: 0,1 | 1=offline | TSC offline o no | TSC offline or not |
| cle.<addr>.<tsc>.plant.code | <tsc>:tsca,tscb | R | Val: integer | Codice impianto | System code | |
| cle.<addr>.virtual.input.incma.mode | R | Val: normal, relative | ||||
| cle.<addr>.virtual.input.incmb.mode | R | Val: normal, relative | ||||
| cle.<addr>.wrx.exists | R | Val: 0,1 | 1=exists | |||
| cle.<addr>.wrx.offline | R | Val: 0,1 | 1=exists |
