InimPrevidia

INIM PREVIDIA are multi-zone fire panels. The integration with HSYCO can be accomplished via a standard Modbus TCP/IP connection. This I/O server was developed following the MODBUS documentation INIM Guida all'integrazione con sistemi di supervisione

This driver has been tested on INIM PREVIDIA Ultra, Max and Compact panels.

Communication

INIM PREVIDIA panels can be connected via ethernet. A valid IP address must be assigned to the panel. MODBUS PROTOCOL must be enabled. Please refer to the manual for detailed instruction about MODBUS protocol configuration.

HSYCO Configuration

Add a INIMPREVIDIA I/O Server in the I/O Servers section of the Settings and set its parameters:

Communication

• Address: IP address of the INIM PREVIDIA panel
• Port: TCP/IP port for MODBUS communication (default 502)

High Availability

• Shutdown when inactive: defaults to false.

Options

ID	Default	Values	Description
gui	true	true	enable support for the UI object, UISET actions and USER commands
		false	disable UI support
startupevents	false	true	generate IO events also during the driver’s start-up phase
		false	start generating events only after HSYCO is aligned with the current status of the system
unitid	1	> 0	MODBUS unit ID of the INIM PREVIDIA panel
pollingtime	1000	n >= 1000, n <= 30000	the data polling interval, in milliseconds.
loopsnumber	16	n = 1..16	the number of configured loops
groupsnumber	240	n = 1..240	the number of configured groups
zonesnumber	1000	n = 1..1000	the number of configured zones

 INIM PREVIDIA Compact panel requires loopsnumber set to 2

inimprevidia.ini

The inimprevidia.ini file is a specific configuration file located in the root directory.

This file is required to provide the I/O Server the name assignment of zones and devices.

This is an example of the file content:

previdia.z1 = Zone 1
previdia.g2 = Group 2
previdia.l1.d1 = Device 1 Loop 1
previdia.l8.d4 = Device 8 Loop 4

Where "previdia" is the I/O Server id of the INIM PREVIDIA I/O Server

If you have multiples INIM PREVIDIA I/O Servers:

previdia1.z1 = Zone 1 Detnov 1
previdia2.z1 = Zone 2 Detnov 2
previdia1.l1.d1 = Device 1 Loop 1 Detnov 1
previdia2.l2.d1 = Device 1 Loop 1 Detnov 2

Datapoints

ID	Value	R/W	Description
connection	online	R	connection established
	offline	R	HSYCO can't connect to the panel
reset	1	W	force panel reset
mute	0	W	disable panel mute
	1	W	enable panel mute