Difference between revisions of "Lares4"

From HSYCO
Jump to navigation Jump to search
Line 58: Line 58:
  
 
|}
 
|}
 +
 +
 +
== Log Files ==
 +
If a Ksenia anti-intrusion unit is connected to HSYCO, the security.log file will be written in the same directories as the daily log files.
 +
 +
This file is never overwritten or deleted from HSYCO SERVER.
 +
 +
<pre>
 +
2018.02.20 16:59:28.516 - ks - 20/02/2018 16:56:36 - Disinserimento - Part 1 - U1
 +
2018.02.20 17:00:24.527 - ks - 20/02/2018 16:57:36 - Inserimento - Part 1 - U1
 +
2018.02.20 17:00:44.318 - ks - 20/02/2018 16:57:57 - Allarme - Zone 1
 +
2018.02.20 17:00:49.241 - ks - 20/02/2018 16:57:58 - Ripristino - Zone 1
 +
2018.02.20 17:00:54.043 - ks - 20/02/2018 16:58:06 - Disinserimento - Part 1 - U1
 +
2018.02.20 17:01:18.905 - ks - 20/02/2018 16:58:29 - Fallita Comunicazione - Leonardo - Vocale GSM
 +
2018.02.20 17:01:29.053 - ks - 20/02/2018 16:58:40 - Fallita Comunicazione - Leonardo - SMS
 +
</pre>
 +
 +
Other information about the Ksenia driver are stored in the message.log daily file.
 +
 +
 +
== Release Notes ==
 +
 +
=== 3.7.0 ===
 +
*initial version release
 +
 +
----
 +
 +
 +
''Ksenia is a registered trademark of Ksenia Security s.r.l.''

Revision as of 11:49, 28 May 2021

The KSENIA lares 4.0 are multi-area security systems. The I/O Server has been tested on unit with firmware version 1.72.2 and web server version 1.32.7. Actually this driver runs only in HTTP mode (port 80 is set by default).


HSYCO Configuration

Add a KSENIA I/O Server in the I/O Servers section of the Settings and set its parameters:

Communication

  • IP Address: host name or IP address of the panel
  • IP Port: leave it blank

Authentication

  • Password: pin to access the web server

High Availability

  • Shutdown when inactive: defaults to false.

Options

ID Default Values Description
startupevents false true generate IO events also during the driver’s start-up phase
false start generating events only after HSYCO is aligned with the current status of the system
pollinterval 1000 n > 1000 the data acquisition interval, in milliseconds
logsize 300 n ≥ 0 the number of log lines to display in the UI object
gui true true enable the UISET "visible" field for all system zones
false disable the UISET "visible" field for all system zones


Log Files

If a Ksenia anti-intrusion unit is connected to HSYCO, the security.log file will be written in the same directories as the daily log files.

This file is never overwritten or deleted from HSYCO SERVER.

2018.02.20 16:59:28.516 - ks - 20/02/2018 16:56:36 - Disinserimento - Part 1 - U1
2018.02.20 17:00:24.527 - ks - 20/02/2018 16:57:36 - Inserimento - Part 1 - U1
2018.02.20 17:00:44.318 - ks - 20/02/2018 16:57:57 - Allarme - Zone 1
2018.02.20 17:00:49.241 - ks - 20/02/2018 16:57:58 - Ripristino - Zone 1
2018.02.20 17:00:54.043 - ks - 20/02/2018 16:58:06 - Disinserimento - Part 1 - U1
2018.02.20 17:01:18.905 - ks - 20/02/2018 16:58:29 - Fallita Comunicazione - Leonardo - Vocale GSM
2018.02.20 17:01:29.053 - ks - 20/02/2018 16:58:40 - Fallita Comunicazione - Leonardo - SMS

Other information about the Ksenia driver are stored in the message.log daily file.


Release Notes

3.7.0

  • initial version release


Ksenia is a registered trademark of Ksenia Security s.r.l.