Siemens Vanderbilt Edp

From HSYCO
Jump to navigation Jump to search

Siemens / Vanderbilt is a family of security panels compatible with the control protocol EDP. This driver has been developed following the EDP protocol specification rev 2.2, 2012-11-12 The integration with HSYCO can be accomplished with a TCP/IP network connection.

Siemens / Vanderbilt Configuration

Login in the panel web configuration page using a Engineer account.

You should see something like this in the upper right corner of the web page:

Vanderbilt01.png

Select "Configuration" then "Reporting" then "EDP". You must configure 2 different receivers, one for the command session, one for the event session.

Vanderbilt02.png

Let's take a look in detail at the configuration of these receivers:

Vanderbilt03.png

fsdfsdf

Vanderbilt04.png