TSECMACS
Revision as of 09:41, 19 August 2022 by Christian (talk | contribs) (Created page with "The TSEC MACS MACS is a perimeter anti-intrusion system for rigid and semi-rigid metal fences. Category:I/O Server == HSYCO Configuration == Add the TSECMACS I/O Server...")
The TSEC MACS MACS is a perimeter anti-intrusion system for rigid and semi-rigid metal fences.
HSYCO Configuration
Add the TSECMACS I/O Server in the I/O Servers section of the Settings and set its parameters:
Communication
- IP Address: host name or IP address of the panel
- IP Port: TCP/IP port assigned to the panel's web server
Authentication
- Username: username to access the web server
- Password: password to access the web server
Options
| ID | Default | Values | Description |
|---|---|---|---|
| startupevents | false | true | generate IO events also during the driver’s start-up phase |
| false | start generating events only after HSYCO is aligned with the current status of the system | ||
| gui | false | true | |
| false | |||
| pollinterval | 1000 | n >= 1000 | the data acquisition interval, in milliseconds |
Datapoints
| ID | Value | R/W | Description |
|---|---|---|---|
| connection | online | R | connection established |
| offline | R | HSYCO can't connect to the sensor | |
| elevation | <value> | R | sensor current pitch. Negative angles mean the sensor is pointing downward |
| rotation | <value> | R | sensor current rotation. Values around 0 mean the sensor is horizontal (volumetric) while values around 90 mean the sensor is vertical (barrier) |
| totaltargets | n >= 0 | R | total targets detected by the sensor simultaneously |
| targets.<n>.distance | <value> | R | distance in mm of target <n> from the sensor |
| targets.<n>.rcs | <value> | R | measure of the size of detected target <n> |
| targets.<n>.id | <value> | R | identifier of target <n>. The identifier may change if the target is lost |
| totalarms | n >= 0 | R | total alarms triggered simultaneously |
| alarms.<n>.detection | alarm | R | detection situation, alarm <n> has been triggered in the alarm area |
| pre-alarm | R | detection situation, alarm <n> has been triggered in the pre-alarm area | |
| alarms.<n>.tampering | moved | R | tampering situation with alarm <n>, the sensor has been moved |
| masked | R | tampering situation with alarm <n>, the sensor has been masked | |
| alarms.<n>.fault | voltage | R | fault situation with alarm <n>, input voltage out of range |
| firmware | R | fault situation with alarm <n>, firmware internal error | |
| HW-RF | R | fault situation with alarm <n>, hardware RF head | |
| HW-MEMS | R | fault situation with alarm <n>, hardware MEMS | |
| mask | R | fault situation with alarm <n>, masking not ready | |
| storage | R | fault situation with alarm <n>, corrupted storage | |
| motion | R | fault situation with alarm <n>, motion detector not responding | |
| alarms.<n>.totaltargets | n >= 0 | R | total targets detected simultaneously, associated with alarm <n> |
| alarms.<n>.targets.<m>.distance | <value> | R | distance in mm of target <m> (associated with alarm <n>) from the sensor |
| alarms.<n>.targets.<m>.rcs | <value> | R | measure of the size of detected target <m> (associated with alarm <n>) |
| alarms.<n>.targets.<m>.id | <value> | R | identifier of target <m> (associated with alarm <n>) |
