Difference between revisions of "Wolf8Access Utility"

From HSYCO
Jump to navigation Jump to search
Line 1: Line 1:
 
[[Category:Manager]]
 
[[Category:Manager]]
The Wolf8Access Utility application provides a user interface to configure all the keys associated to all Wolf8Access EVO modules. When a Wolf8Access I/O Server is defined in HSYCO, the Wolf8Access Utility will appear among the applications of the manager.
+
The Wolf8Access Utility application provides a user interface to configure all the keys associated to all Wolf8Access EVO modules. You can associate a name to all Wolf8Access keys. When a Wolf8Access I/O Server is defined in HSYCO, the Wolf8Access Utility will appear among the applications of the manager.
  
 
To automatically discover all the keys associated to all Wolf8Access EVO modules, enable auto-discovery ("Auto-discovery" checkbox).
 
To automatically discover all the keys associated to all Wolf8Access EVO modules, enable auto-discovery ("Auto-discovery" checkbox).
Line 9: Line 9:
  
  
From the list, click on each client to add, edit and save its configuration.
+
From the list, click on each voice to edit, save or delete relative key configuration.
  
 
[[File:Wolf8Access_Utility_config.png|thumb|400px|Client configuration]]
 
[[File:Wolf8Access_Utility_config.png|thumb|400px|Client configuration]]

Revision as of 16:01, 1 October 2021

The Wolf8Access Utility application provides a user interface to configure all the keys associated to all Wolf8Access EVO modules. You can associate a name to all Wolf8Access keys. When a Wolf8Access I/O Server is defined in HSYCO, the Wolf8Access Utility will appear among the applications of the manager.

To automatically discover all the keys associated to all Wolf8Access EVO modules, enable auto-discovery ("Auto-discovery" checkbox). All discovered keys will appear in the list:


Clients discovery


From the list, click on each voice to edit, save or delete relative key configuration.

Client configuration

Parameters:

  • ID: the ID to assign to the client. It cannot be empty. The default value corresponds to the IP address of the client
  • Username: client's username
  • Password: client's password


To manually add a device click on the "+" button at the bottom-left corner of the page.

To remove a device, click on it from the list, click on "Delete" and confirm. If the auto-discovery is enabled, the device will reappear upon the next received frame from it.

Disable the auto-discovery when all the required devices have been configured.

The devices list shows the following fields:

  • ID: ID of the device
  • Online: connection status of the client with the MQTT broker
  • Last seen: date and time of the last received valid frame

Committing the configuration

When all clients are configured, click on the "Commit" button on the top-right corner of the main page. The configuration will be persisted and the MQTTBroker I/O Server will restart with the new configuration.