NotifierESibM

Notifier E-SIB-M is a license key to enable Modbus TCP communication for a series of Notifier and Honeywell fire detection panels:

AM8200 Notifier (legacy up to 8 lines per control panel)
AM8100 Notifier
AM1000CL
AM2000CL
AM6000CL
MA1000-03
MA2000-03
MA1000-01
MA2000-01
MA1000-02
MA2000-02
AM8200N Notifier (up to 4 lines per control panel)
AM8200N Honeywell (up to 4 lines per control panel)
AM8200 Honeywell (legacy up to 8 lines per control panel)
AM8100 Honeywell
MA1000-04 
MA2000-04

The integration with HSYCO can be accomplished via a standard Modbus TCP/IP connection. This I/O server was developed following the MODBUS documentation Mod-Bus_Prot_rev.01.

 For any information regarding the activation of the Modbus protocol on the E-SIB-M dongle, please contact your Notifier distributor.

Communication

INIM PREVIDIA panels can be connected via ethernet. A valid IP address must be assigned to the panel. MODBUS PROTOCOL must be enabled. Please refer to the manual for detailed instruction about MODBUS protocol configuration.

HSYCO Configuration

Notifier E-SIB-M compatible panels can be connected via ethernet. A valid IP address must be assigned to the panel. MODBUS PROTOCOL must be enabled. Please refer to the panel manual for detailed instruction about MODBUS protocol configuration.

Communication

• Address: IP address of the Notifier E-SIB-M panel panel
• Port: TCP/IP port for MODBUS communication (default 502)

High Availability

• Shutdown when inactive: defaults to false.