Difference between revisions of "Installation Guide"

From HSYCO
Jump to navigation Jump to search
 
(74 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 +
[[Category:HSYCO]]
 
HSYCO SERVER ships pre-installed with the latest version of the HSYCO software, on a Linux Ubuntu 12.04 LTS Server distribution stripped of all not-essential services.
 
HSYCO SERVER ships pre-installed with the latest version of the HSYCO software, on a Linux Ubuntu 12.04 LTS Server distribution stripped of all not-essential services.
  
Line 4: Line 5:
  
  
[[File:Installation Server.png]]
+
[[File:HSYCO PRO.jpg|center|600px]]
  
  
Line 11: Line 12:
 
== Initial Set-Up ==
 
== Initial Set-Up ==
  
There are two standard hardware configurations, a compact server with one Ethernet port and one Serial port, and a larger, expandable server with two Ethernet ports and four serial ports.
+
Hsyco comes with different hardware configurations:
  
[[File:Installation ARK1122.png]]
+
* '''HSYCO MINI - ARK1122'''
 +
[[File:Installation ARK1122.png|center|500px]]
  
 +
To start the server simply plug the power supply. HSYCO automatically starts, the execution of HSYCO is signalled by three consecutive high-pitch beeps.
  
[[File:Installation ARK2120.png]]
+
 
 +
* '''HSYCO PRO - ARK2120'''
 +
[[File:Installation ARK2120.png|center|600px]]
 +
 
 +
To start the server simply plug the power supply. HSYCO automatically starts, the execution of HSYCO is signalled by three consecutive high-pitch beeps.
 +
 
 +
 
 +
* '''HYSCO PI - RASPBERRY PI'''
 +
[[File:Installation RaspberryPI.png|center|300px]]
 +
To start the server simply plug the power supply. HSYCO automatically starts in two minutes (approx).
 +
  
 
HSYCO SERVER is configured with the following default network configuration:
 
HSYCO SERVER is configured with the following default network configuration:
Line 30: Line 43:
 
On the two Ethernet ports server, the port which is usually configured is the one next to the USB ports, shown as LAN1. The Ethernet port LAN2, on the right, works but it is not configured.
 
On the two Ethernet ports server, the port which is usually configured is the one next to the USB ports, shown as LAN1. The Ethernet port LAN2, on the right, works but it is not configured.
  
== The Configuration Console ==
 
  
HSYCO Server provides a simple low-level maintenance console, used to reboot the system, reset its settings or restore the whole system to the original factory configuration.
+
== Access to the Manager ==
  
This console is not used for normal operations.
+
HSYCO SERVER is pre-configured with a Web-based toolkit of applications, the [[Manager]], that gives you access to configuration and administration functions, including the ability to change the network settings and the operating system's password, HSYCO users management and the tools to create customized graphic user interfaces.
  
The console is available using a keyboard and a monitor connected to the VGA/DVI/HDMI video out connector.
+
To access the system's management application, simply called [[Manager]] from now on, enter the following URL in your Web Browser:
  
 +
<nowiki>https://192.168.0.50/hsycoserver/manager</nowiki>
  
<syntaxhighlight lang="text">
+
The Manager runs on most modern Web browsers, including tablets like Apple’s iPad. It even runs on small screen devices like the iPhone or iPod touch, although a larger screen size is advisable for ease of use. Microsoft’s Internet Explorer versions 8 and older are not supported, and IE9 is not guaranteed to work, although it should in most cases.
Server Configuration Console
 
 
 
1) Reboot the system
 
2) Halt the system
 
3) Stop HSYCO Server
 
4) Start HSYCO Server
 
5) Restore network configuration to factory defaults (192.168.0.50)
 
6) Delete all PINs and file server password and restore default values
 
7) Restore database to factory defaults. All data will be lost
 
8) Restore system software to factory defaults. All data will be lost
 
Type a function number and press Enter [1, 2, 3, 4, 5, 6, 7, 8]:
 
</syntaxhighlight>
 
 
 
 
 
Type the desired function number and Enter, then press Y to confirm after the beeps (the system will sound a number of beeps, corresponding to the function number; this should allow you to access the console functions using the keyboard and audio feedback only, without a monitor).
 
 
 
Function 1 performs the operating system shutdown, followed by a reboot.
 
 
 
Function 2 performs the operating system shutdown and halts the system. You should turn it off then back on to restart.
 
 
 
Function 3 and 4 are used to temporarily stop the HSYCO Server process, and to restart it.
 
 
 
 
 
{{note|Use functions 5 to 8 with caution. These function will delete configuration settings, user data, and security settings of the system. They could allow a local user with physical access to the server, unrestricted access to your data.}}
 
 
 
 
 
Function 5 restores the factory default network configuration. If you make a mistake while setting the network parameters, preventing access to the server via the network connection, you can use this function to reset the configuration and regain access to the server.
 
 
 
Function 6 removes all users’ PIN and PUK codes, restoring the default 00000 administrator enabled PIN. It also reset the operating system password to its default.
 
 
 
Function 7 deletes all data in the HSYCO database, including persistent variables.
 
 
 
Function 8 performs a full factory reset, returning the system to the HSYCO version and settings as shipped, removing all custom data, configuration and programs.
 
 
 
== The Administration Pages ==
 
 
 
HSYCO SERVER is pre-configured with a system’s management application that gives you access to the administration functions, including the ability to change the network settings and the operating system’s password, and HSYCO users management.
 
 
 
The protection of any system from unauthorized access is extremely important.
 
 
 
HSYCO uses several security mechanisms, and it is therefore safe to use through the Internet or inside a local network.
 
  
 
HSYCO default configuration only accepts Web requests through the HTTPS secure protocol, while access via HTTP is disabled.
 
HSYCO default configuration only accepts Web requests through the HTTPS secure protocol, while access via HTTP is disabled.
Line 87: Line 59:
  
  
{{tip|The factory default URLKey is hsycoserver.}}
+
{{note|The factory default URLKey is hsycoserver.}}
  
  
 
The URLKey is not a secret password, but only an additional protection feature.
 
The URLKey is not a secret password, but only an additional protection feature.
  
To access the system’s management application, simply called Manager from now on, enter the following URL in your Web Browser:
+
Because the SSL certificate used to secure the communication between the Web Browser and HSYCO SERVER is self-generated, you will be asked to accept the server's certificate.
 
 
<nowiki>https://192.168.0.50/hsycoserver/manager</nowiki>
 
 
 
Because the SSL certificate used to secure the communication between the Web Browser and HSYCO SERVER is self-generated, you will be asked to accept the server’s certificate.
 
  
 
On the iPod touch, iPhone or iPad press Continue, on other browsers follow the dialog boxes to permanently accept the certificate.
 
On the iPod touch, iPhone or iPad press Continue, on other browsers follow the dialog boxes to permanently accept the certificate.
  
  
[[File:Installation Certificate.png]]
+
[[File:Installation Certificate.png|center]]
  
  
Line 110: Line 78:
  
  
[[File:Installation PIN PUK.png]]
+
[[File:Installation PIN PUK.png|center]]
  
  
  
{{tip|The default pre-configured PIN and PUK are the same for all HSYCO SERVERS, to let you conveniently access the user interface during the initial installation. Both the PIN and PUK should be changed immediately to different, hard to guess numbers.}}
+
{{note|The default pre-configured PIN and PUK are the same for all HSYCO SERVERS, to let you conveniently access the user interface during the initial installation. Both the PIN and PUK should be changed immediately to different, hard to guess numbers.}}
  
  
Press the Admin icon in the Manager’s main menu to access the Users, System Password, Network and Clock settings functions, described below.
+
Press the [[Admin]] icon in the [[Manager]]’s main menu to access the [[Admin#Users|Users]], [[Admin#System Password|System Password]], [[Admin#Network|Network]] and [[Admin#Clock|Clock]] settings functions.
  
  
[[File:Installation Admin.png]]
+
[[File:Installation Admin.png|center]]
  
  
=== Users ===
+
HSYCO is now ready to be configured!
  
The users page lets you fully manage individual users from the HSYCO Web interface.
+
For further information about the Manager toolkit usage please visit the [[Settings|Configuration Guide]].
  
You can set and revoke the administrator rights, enable and disable a user, modify PIN and PUK codes, delete a user, and also define the rights of access to the subdirectories.
+
== SSH Access to the Operating System ==
  
If no pages have been specified through the Web interface, the user has no limits and can access all the existing pages.
+
The configuration of the operating system only needs one administrator user, whose login is '''hsyco'''.
  
 +
The password initially configured for the '''hsyco''' user is '''hsycoserver'''.
  
[[File:Installation Users.png]]
+
{{note|In order to guarantee the system safety and to prevent any unauthorized access it is essential to modify the access password of the HSYCO user before installing the system onto any not-secure LAN network.}}
  
 +
The SSH secure protocol is used to access the operating system’s console and, if needed, to manage files. The SSH protocol encrypts all traffic and can be safely used for remote management. If the network has a firewall it might be necessary to open port '''TCP 22''' and configure traffic forwarding towards the HSYCO SERVER IP address.
  
To change the predefined PIN and PUK, select user, then enter the new PIN and PUK codes in the appropriate fields, and press Save to confirm.
+
HSYCO is installed in the home directory of the '''hsyco''' user, '''/home/hsyco'''.
  
Or you can create one or more new users, at least one of them with administrator privileges, then log in again with the new administrator PIN and PUK and delete the default user.
+
In this directory, the subdirectory '''./hsyco''' contains the software, the configuration files, custom Java programs, logs and recorded images from cameras.
  
=== System Password ===
+
Several software programs are available for the SSH access on Microsoft Windows, in particular [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Putty] to access the console, and Bitvise Tunnelier [http://www.bitvise.com/download-area] and [http://winscp.net/eng/index.php WinSCP] to access files through SFTP.
  
The system password is used to access both the operating system’s console, directly or with SSH, and the HSYCO files through the files sharing network service.
+
On Apple Mac OS X the SSH access is integrated in the operating system and directly usable through Terminal, while [http://cyberduck.ch/ Cyberduck] is one of the most widespread utilities to manage files through SFTP.
  
This password is needed to access the HSYCO SERVER for maintenance and to change its configuration.
+
On Ubuntu OS the SSH access is integrated in the operating system and accessible through Terminal, while [https://filezilla-project.org/ Filezilla] is a good solution for managing file  through SFTP.
  
To change the system password you should log in with a PIN and PUK corresponding to a user with administrator privileges.
+
=== Start and Stop the HSYCO Server ===
  
 +
HSYCO starts automatically with the operating system when the server is turned on. The execution of HSYCO is signaled by three consecutive high-pitch beeps.
  
[[File:Installation Password.png]]
+
HSYCO also restarts automatically with every change to the '''hsyco.ini''', '''hsyco.jar''' and '''com/hsyco/user.class''' files. In this case the restart is also signaled by three beeps.
  
 +
To manually stop HSYCO, access the console via SSH:
  
Click the Password button in the Admin menu and enter the new password twice, then press Save to confirm.
+
ssh hsyco@192.168.0.50
  
In order to guarantee an adequate safety the password should be composed by letters and numbers, should not contain well-known words and needs to be of at least 10-16 characters.
+
and execute the command:
  
You should save the password in a safe place.
+
sudo stop hsyco
  
If you forget the password, but still have access to HSYCO, you can simply go to the password page and type a new password.
+
To start HSYCO, execute:
 +
sudo start hsyco
  
The system password should be known only by the owner of the system.
+
Finally, to verify the current state of HSYCO execute:
  
If, for maintenance reasons, someone else needs to access HSYCO, you should change the password to a temporary new password, then revert to your secret password.
+
sudo status hsyco
  
 +
If HSYCO is running, the answer to the command will be something like:
  
{{tip|Be aware that the system password provides unrestricted access to the operating system configuration, to the HSYCO configuration, including users administration, and to all files, like recorded images from all the cameras and log files.}}
+
hsyco (start) running, process ...
  
=== Network Settings ===
+
== SMB Access to Files ==
  
The network settings page lets you change the network parameters of HSYCO SERVER.
+
To guarantee an easy access to files, HSYCO SERVER makes the main directory available through a standard ''file server'' (network disk) service. The name of the service is ''hsyco''. To access the file server you should use the same hsyco user and password provided to access the operating system.  
  
Be sure to know the meaning and the effects of your changes, as a mistake in these parameters may render HSYCO SERVER not accessible from the network and through the HSYCO Web interface.
+
=== Access to Files on Microsoft Windows ===
  
 +
In order to connect a Microsoft Windows system to the HSYCO SERVER shared network folder, select '''Tools > Map network drive''' from the Explorer menu.
  
{{note|HSYCO implements a safety mechanism that in most cases would automatically revert, after 5 minutes from the change, the network settings to the original configuration if for any reason network access to HSYCO is lost after a change.}}
+
Type ''\\192.168.0.50\hsyco'' in the field '''Folder''' and press '''Finish'''.
  
  
[[File:Installation Network.png]]
+
[[File:Access Files Windows1.png]]
  
  
To change the network settings, enter the new parameters and press Save.
+
Then, insert the user name (''hsyco'', as before) and password (initially ''hsycoserver'', that you can modify as already described) and press OK.
  
After the change, you have 5 minutes to log in again to any page to confirm your changes.
 
  
The network settings page is not normally needed after the initial installation, and it is usually deleted from the menu to prevent accidental changes to the network configuration.
+
[[File:Access Files Windows2.png]]
  
=== Clock Settings ===
 
  
The clock page sets the server’s clock and time zone, and enables the automatic update of the clock based on Internet time servers.
+
All the HSYCO files are available and accessible in the shared folder window, and you have full read and write permissions on them.
  
  
[[File:Installation Clock.png]]
+
{{note|In order to guarantee the highest safety and protection of HSYCO from any unauthorized access, you should disconnect the shared folder when not in use and avoid saving<sup>[[#note8|[Note 8]]]</sup> the password for automatic access.}}
  
 +
To manually edit the content of the files directly from the shared folder, use the '''WordPad''' application, and not the '''Notepad''' application, the latter cannot correctly manage the text files format.
  
To change the time settings, enter the new parameters and press Save.  
+
To open the files using ''WordPad'', right click on the file, then select '''Open with...''' and ''WordPad'', if it appears in the menu, or go to ''Programs'' and choose WordPad in the list of available applications.
  
All the other parameters are read-only from the clock page, and can be set using the Settings menu, as explained in the [[Configuration Guide]].
 
  
The time zone information is used to obtain the correct local time and automatically adjust for daylight saving time.
+
[[File:Access Files Windows3.png]]
  
If automatic time is set to on HSYCO automatically sets the local date and time by polling Network Time Protocol (NTP) servers.
 
  
== The Manager ==
+
<span id="note8">
 +
;Note 8 :  Do not select the ''Remember my password'' option in the window where the username and password are required.
 +
</span>
  
The Manager is the Web-based toolkit of applications that you will use to create  customized graphic user interfaces and access all system’s configuration files.
+
=== Access to Files on Mac OS X ===
{{note|The Manager runs on most modern Web browsers, including tablets like Apple’s iPad. It also runs on small screen devices like the iPhone or iPod touch, although a larger screen size is advisable for ease of use. Microsoft’s Internet Explorer versions 8 and older are not supported, and IE9 is not guaranteed to work, although it should in most cases.}}
 
  
 +
In order to connect an Apple Mac OS X system to the HSYCO SERVER file server, select '''Go > Connect to Server''' from the '''Finder''' menu.
  
To access the Manager, enter the following URL in your Web Browser:
 
  
https://192.168.0.50/hsycoserver/manager
+
[[File:Access Files Mac1.png]]
  
You need to authenticate using a PIN with administrator privileges to use the Manager.
 
  
 +
In the '''Server Address''' field insert ''smb://192.168.0.50'' and press '''Connect'''.
  
[[File:Manager menu.png]]
+
Then, insert the username (''hsyco'') and password (initially ''hsycoserver'', that you can modify as already described) and press '''Connect'''.
  
  
Touch “about” in the bottom left corner to show HSYCO’s current version information.
+
[[File:Access Files Mac2.png]]
  
  
[[File:Manager About.png]]
+
{{note| In order to guarantee the highest safety and protection of HSYCO from any unauthorized access, we advise you to disconnect the shared folder when not in use and not to save the password in the Mac ''keychain''.}}
  
 +
== Software License Key ==
  
The Manager has several application.
+
The license.txt file contains the software license key needed to unlock HSYCO. The first time HSYCO is started, or in case this file is removed before start, HSYCO creates a new file containing the encrypted code that univocally identifies the hardware where the software runs. In order to allow the correct execution of HSYCO the file should contain the software license key, issued by Home Systems Consulting, specific to every single computer.  
  
'''Admin''' for basic user and network settings, as already discussed.
+
{{note|The hardware identification code is based on the hardware components installed on the server. For example, by replacing or adding network cards the code changes and therefore the software license key will be no longer valid for the new configuration.}}
  
The '''Project Editor''' is the visual editor you use to customize the user interface, and will be described in the Customization chapter.
+
If the license key is not in the file, or if it is not correct, HSYCO disables all the access functions to the field devices, keeping only the Web Server working. It will be therefore possible to access the Web pages, but not to execute any action on or interface to the systems connected to HSYCO.
  
The '''File Manager''' provides access to all HSYCO’s files, just like the standard file manager you have in your personal computer, only this one is fully Web-based and works directly on HSYCO Server’s files.
+
{{note|The possible error messages related to the software license are written in the daily log files.}}
  
The '''Log Viewer''' is a real-time viewer of HSYCO’s logs.
+
The content of license.txt, generated by HSYCO and containing only the hardware identification code is the following:
 +
#Generated by HSYCO CONTROLLER 3.3.0
 +
#Tue Dec 10 11:49:06 CET 2013
 +
hwid=2080334b6283f450283bd4bbc3389bf66dc03dda
  
The '''Status Browser''', a real-time viewer of data points, variables and dynamic user interface attributes, will be discussed in the Programming chapter.
+
To unlock HSYCO features, replace the license.txt file generated by HSYCO at the time of its first execution with the license.txt version with the key provided by Home Systems Consulting. The file and the key are automatically recognized within a few seconds, it is therefore not necessary to restart HSYCO.
  
The '''System Monitor''' is used to monitor several key hardware and operating system parameter of the HSYCO server.
+
This is an example of the complete software license key file:
  
The '''Wiring Editor''', an easy to use end-user logic and scenarios builder, will be described n the Customization chapter.
+
#Generated by HSYCO LICENSE MANAGER 3.3.0
 +
#Tue Dec 10 12:20:00 CET 2013
 +
name=Company Name
 +
hwid=2080334b6283f450283bd4bbc3389bf66dc03dda
 +
key=302D021500898B20F13ABE66DF3D2577809C6A53343A23A5CD0214540FD580A1E3DA1CBEB18D11E98CAAE453D402BF
  
Finally, the '''Knx Utility''' and '''BACnet Utility''' applications are also available through the Manager if the respective I/O servers are enabled.
+
== The Configuration Console ==
  
You can switch between applications touching the [[File:Manager Switching Applications.png]] icon on the top bar.
+
HSYCO Server provides a simple low-level maintenance console, used to reboot the system, reset its settings or restore the whole system to the original factory configuration.
  
[[File:Manager Top Bar.png]]
+
This console is not used for normal operations.
  
 +
The console is available using a keyboard and a monitor connected to the VGA/DVI/HDMI video out connector.
  
Using a PC with a physical keyboard, you can press [Ctrl] and [Shift] at the same time for fast switching between applications. An application selection panel appears until you keep the [Ctrl] key pressed; select the application you need by repeatedly pressing [Shift], then releasing [Ctrl].
 
  
 +
<syntaxhighlight lang="text">
 +
Server Configuration Console
  
=== The File Manager ===
+
1) Reboot the system
 +
2) Halt the system
 +
3) Stop HSYCO Server
 +
4) Start HSYCO Server
 +
5) Restore network configuration to factory defaults (192.168.0.50)
 +
6) Delete all PINs and file server password and restore default values
 +
7) Restore database to factory defaults. All data will be lost
 +
8) Restore system software to factory defaults. All data will be lost
 +
Type a function number and press Enter [1, 2, 3, 4, 5, 6, 7, 8]:
 +
</syntaxhighlight>
  
The File Manager application offers all the conventional tools used to manage files, including a text editor to modify text files without having to download them to your computer.
 
  
[[File:Manager File Manager.png]]
+
Type the desired function number and Enter, then press Y to confirm after the beeps (the system will sound a number of beeps, corresponding to the function number; this should allow you to access the console functions using the keyboard and audio feedback only, without a monitor).
  
 +
Function 1 performs the operating system shutdown, followed by a reboot.
  
You can download and upload individual files or ZIP directories, and create, rename and delete files and directories.
+
Function 2 performs the operating system shutdown and halts the system. You should turn it off then back on to restart.
  
You can download a full backup of all configuration files (excluding the logs and motion directories), using the download root backup tool. Because of its size, this function could take a considerable amount of time to generate and download the backup.zip file.
+
Function 3 and 4 are used to temporarily stop the HSYCO Server process, and to restart it.
  
  
[[File:Manager Tools.png]]
+
{{note|Use functions 5 to 8 with caution. These function will delete configuration settings, user data, and security settings of the system. They could allow a local user with physical access to the server, unrestricted access to your data.}}
  
  
You can also activate a small live log view window, quite a useful tool while you are editing files and want to check the logs for debugging.
+
Function 5 restores the factory default network configuration. If you make a mistake while setting the network parameters, preventing access to the server via the network connection, you can use this function to reset the configuration and regain access to the server.
  
 +
Function 6 removes all users’ PIN and PUK codes, restoring the default 00000 administrator enabled PIN. It also reset the operating system password to its default.
  
[[File:Manager Text Editor.png]]
+
Function 7 deletes all data in the HSYCO database, including persistent variables.
  
 
+
Function 8 performs a full factory reset, returning the system to the HSYCO version and settings as shipped, removing all custom data, configuration and programs.
In the text editor, if someone modifies the file you are currently editing, you will be prompted with a warning message, asking to either reload the file with the new version, or ignoring the changes.
 
 
 
 
 
[[File:Manager File Changed.png]]
 
 
 
 
 
Your changes will be lost if you accept to reload the new version of the file.
 
 
 
 
 
�==== Upgrading and restarting HSYCO ====
 
In order to upgrade the HSYCO software version, you should simply upload a new version of the hsyco.jar file to the root directory. After the upload, the server will restart and the Manager will reload on the browser.
 
 
 
You can also manually force an HSYCO restart. To do so, select the hsyco.jar file and press the “restart hsyco” button in the right panel.
 
 
 
 
 
[[File:Manager Restart.png]]
 

Latest revision as of 15:40, 5 March 2014

HSYCO SERVER ships pre-installed with the latest version of the HSYCO software, on a Linux Ubuntu 12.04 LTS Server distribution stripped of all not-essential services.

The Oracle Java SE Runtime Environment version 7 is also installed. No other software is required.


HSYCO PRO.jpg


This chapter describes the access procedures for the basic management of the system and the structure of HSYCO’s installation and configuration files.

Initial Set-Up

Hsyco comes with different hardware configurations:

  • HSYCO MINI - ARK1122
Installation ARK1122.png

To start the server simply plug the power supply. HSYCO automatically starts, the execution of HSYCO is signalled by three consecutive high-pitch beeps.


  • HSYCO PRO - ARK2120
Installation ARK2120.png

To start the server simply plug the power supply. HSYCO automatically starts, the execution of HSYCO is signalled by three consecutive high-pitch beeps.


  • HYSCO PI - RASPBERRY PI
Installation RaspberryPI.png

To start the server simply plug the power supply. HSYCO automatically starts in two minutes (approx).


HSYCO SERVER is configured with the following default network configuration:

  • IP address: 192.168.0.50
  • Net mask: 255.255.255.0
  • Default Gateway: 192.168.0.1
  • DNS: 192.168.0.1


The IP address 192.168.0.50 will be used from now on in all the examples as the HSYCO SERVER address.

On the two Ethernet ports server, the port which is usually configured is the one next to the USB ports, shown as LAN1. The Ethernet port LAN2, on the right, works but it is not configured.


Access to the Manager

HSYCO SERVER is pre-configured with a Web-based toolkit of applications, the Manager, that gives you access to configuration and administration functions, including the ability to change the network settings and the operating system's password, HSYCO users management and the tools to create customized graphic user interfaces.

To access the system's management application, simply called Manager from now on, enter the following URL in your Web Browser:

https://192.168.0.50/hsycoserver/manager

The Manager runs on most modern Web browsers, including tablets like Apple’s iPad. It even runs on small screen devices like the iPhone or iPod touch, although a larger screen size is advisable for ease of use. Microsoft’s Internet Explorer versions 8 and older are not supported, and IE9 is not guaranteed to work, although it should in most cases.

HSYCO default configuration only accepts Web requests through the HTTPS secure protocol, while access via HTTP is disabled.

Furthermore, to protect against malicious service discovery robots, HSYCO does not answer to Web requests where only the server address is defined, for example https://192.168.0.50, but requires an extended URL, which must include an access key, called URLKey, defined in the general system configuration parameters.


The factory default URLKey is hsycoserver.


The URLKey is not a secret password, but only an additional protection feature.

Because the SSL certificate used to secure the communication between the Web Browser and HSYCO SERVER is self-generated, you will be asked to accept the server's certificate.

On the iPod touch, iPhone or iPad press Continue, on other browsers follow the dialog boxes to permanently accept the certificate.


Installation Certificate.png


You will see the PIN and PUK authentication page. Enter the default PIN and PUK, and press OK:

PIN: 0000
PUK: 00000 0000 00000


Installation PIN PUK.png


The default pre-configured PIN and PUK are the same for all HSYCO SERVERS, to let you conveniently access the user interface during the initial installation. Both the PIN and PUK should be changed immediately to different, hard to guess numbers.


Press the Admin icon in the Manager’s main menu to access the Users, System Password, Network and Clock settings functions.


Installation Admin.png


HSYCO is now ready to be configured!

For further information about the Manager toolkit usage please visit the Configuration Guide.

SSH Access to the Operating System

The configuration of the operating system only needs one administrator user, whose login is hsyco.

The password initially configured for the hsyco user is hsycoserver.

In order to guarantee the system safety and to prevent any unauthorized access it is essential to modify the access password of the HSYCO user before installing the system onto any not-secure LAN network.


The SSH secure protocol is used to access the operating system’s console and, if needed, to manage files. The SSH protocol encrypts all traffic and can be safely used for remote management. If the network has a firewall it might be necessary to open port TCP 22 and configure traffic forwarding towards the HSYCO SERVER IP address.

HSYCO is installed in the home directory of the hsyco user, /home/hsyco.

In this directory, the subdirectory ./hsyco contains the software, the configuration files, custom Java programs, logs and recorded images from cameras.

Several software programs are available for the SSH access on Microsoft Windows, in particular Putty to access the console, and Bitvise Tunnelier [1] and WinSCP to access files through SFTP.

On Apple Mac OS X the SSH access is integrated in the operating system and directly usable through Terminal, while Cyberduck is one of the most widespread utilities to manage files through SFTP.

On Ubuntu OS the SSH access is integrated in the operating system and accessible through Terminal, while Filezilla is a good solution for managing file through SFTP.

Start and Stop the HSYCO Server

HSYCO starts automatically with the operating system when the server is turned on. The execution of HSYCO is signaled by three consecutive high-pitch beeps.

HSYCO also restarts automatically with every change to the hsyco.ini, hsyco.jar and com/hsyco/user.class files. In this case the restart is also signaled by three beeps.

To manually stop HSYCO, access the console via SSH:

ssh hsyco@192.168.0.50

and execute the command:

sudo stop hsyco

To start HSYCO, execute:

sudo start hsyco

Finally, to verify the current state of HSYCO execute:

sudo status hsyco

If HSYCO is running, the answer to the command will be something like:

hsyco (start) running, process ...

SMB Access to Files

To guarantee an easy access to files, HSYCO SERVER makes the main directory available through a standard file server (network disk) service. The name of the service is hsyco. To access the file server you should use the same hsyco user and password provided to access the operating system.

Access to Files on Microsoft Windows

In order to connect a Microsoft Windows system to the HSYCO SERVER shared network folder, select Tools > Map network drive from the Explorer menu.

Type \\192.168.0.50\hsyco in the field Folder and press Finish.


Access Files Windows1.png


Then, insert the user name (hsyco, as before) and password (initially hsycoserver, that you can modify as already described) and press OK.


Access Files Windows2.png


All the HSYCO files are available and accessible in the shared folder window, and you have full read and write permissions on them.


In order to guarantee the highest safety and protection of HSYCO from any unauthorized access, you should disconnect the shared folder when not in use and avoid saving[Note 8] the password for automatic access.


To manually edit the content of the files directly from the shared folder, use the WordPad application, and not the Notepad application, the latter cannot correctly manage the text files format.

To open the files using WordPad, right click on the file, then select Open with... and WordPad, if it appears in the menu, or go to Programs and choose WordPad in the list of available applications.


Access Files Windows3.png


Note 8 
Do not select the Remember my password option in the window where the username and password are required.

Access to Files on Mac OS X

In order to connect an Apple Mac OS X system to the HSYCO SERVER file server, select Go > Connect to Server from the Finder menu.


Access Files Mac1.png


In the Server Address field insert smb://192.168.0.50 and press Connect.

Then, insert the username (hsyco) and password (initially hsycoserver, that you can modify as already described) and press Connect.


Access Files Mac2.png


In order to guarantee the highest safety and protection of HSYCO from any unauthorized access, we advise you to disconnect the shared folder when not in use and not to save the password in the Mac keychain.


Software License Key

The license.txt file contains the software license key needed to unlock HSYCO. The first time HSYCO is started, or in case this file is removed before start, HSYCO creates a new file containing the encrypted code that univocally identifies the hardware where the software runs. In order to allow the correct execution of HSYCO the file should contain the software license key, issued by Home Systems Consulting, specific to every single computer.

The hardware identification code is based on the hardware components installed on the server. For example, by replacing or adding network cards the code changes and therefore the software license key will be no longer valid for the new configuration.


If the license key is not in the file, or if it is not correct, HSYCO disables all the access functions to the field devices, keeping only the Web Server working. It will be therefore possible to access the Web pages, but not to execute any action on or interface to the systems connected to HSYCO.

The possible error messages related to the software license are written in the daily log files.


The content of license.txt, generated by HSYCO and containing only the hardware identification code is the following:

#Generated by HSYCO CONTROLLER 3.3.0
#Tue Dec 10 11:49:06 CET 2013
hwid=2080334b6283f450283bd4bbc3389bf66dc03dda 

To unlock HSYCO features, replace the license.txt file generated by HSYCO at the time of its first execution with the license.txt version with the key provided by Home Systems Consulting. The file and the key are automatically recognized within a few seconds, it is therefore not necessary to restart HSYCO.

This is an example of the complete software license key file:

#Generated by HSYCO LICENSE MANAGER 3.3.0
#Tue Dec 10 12:20:00 CET 2013
name=Company Name
hwid=2080334b6283f450283bd4bbc3389bf66dc03dda
key=302D021500898B20F13ABE66DF3D2577809C6A53343A23A5CD0214540FD580A1E3DA1CBEB18D11E98CAAE453D402BF

The Configuration Console

HSYCO Server provides a simple low-level maintenance console, used to reboot the system, reset its settings or restore the whole system to the original factory configuration.

This console is not used for normal operations.

The console is available using a keyboard and a monitor connected to the VGA/DVI/HDMI video out connector.


Server Configuration Console

1) Reboot the system
2) Halt the system
3) Stop HSYCO Server
4) Start HSYCO Server
5) Restore network configuration to factory defaults (192.168.0.50)
6) Delete all PINs and file server password and restore default values
7) Restore database to factory defaults. All data will be lost
8) Restore system software to factory defaults. All data will be lost
Type a function number and press Enter [1, 2, 3, 4, 5, 6, 7, 8]:


Type the desired function number and Enter, then press Y to confirm after the beeps (the system will sound a number of beeps, corresponding to the function number; this should allow you to access the console functions using the keyboard and audio feedback only, without a monitor).

Function 1 performs the operating system shutdown, followed by a reboot.

Function 2 performs the operating system shutdown and halts the system. You should turn it off then back on to restart.

Function 3 and 4 are used to temporarily stop the HSYCO Server process, and to restart it.


Use functions 5 to 8 with caution. These function will delete configuration settings, user data, and security settings of the system. They could allow a local user with physical access to the server, unrestricted access to your data.


Function 5 restores the factory default network configuration. If you make a mistake while setting the network parameters, preventing access to the server via the network connection, you can use this function to reset the configuration and regain access to the server.

Function 6 removes all users’ PIN and PUK codes, restoring the default 00000 administrator enabled PIN. It also reset the operating system password to its default.

Function 7 deletes all data in the HSYCO database, including persistent variables.

Function 8 performs a full factory reset, returning the system to the HSYCO version and settings as shipped, removing all custom data, configuration and programs.