Sonos
Jump to navigation
Jump to search
Sonos is...
Contents
Communication
Just make sure the Sonos device is connected to the same local network as HSYCO server is.
HSYCO Configuration
Add a SONOS I/O Server in the I/O Servers section of the Settings and set its parameters:
High Availability
- Shutdown when inactive: defaults to true.
Options
| ID | Default | Values | Description |
|---|---|---|---|
| startupevents | false | true | generate IO events also during the driver’s start-up phase |
| false | start generating events only after HSYCO is aligned with the current status of the system | ||
| room | <room_name> | If specified, the driver will connect to the device with the corresponding room name. If not specified this driver will look for and connect to any Sonos device on the local network |
Datapoints
| ID | Value | R/W | Description |
|---|---|---|---|
| connection | online | R | connection established |
| offline | R | HSYCO can't connect to the device |
User Interface
UISET Actions
USER Commands
Release Notes
3.5.0
- initial release
Sonos is a registered trademarks of Sonos, Inc
