Difference between revisions of "Kissbox"
| (3 intermediate revisions by one other user not shown) | |||
| Line 2: | Line 2: | ||
Multiple Transceivers can be set up to work together and distribute up to 64 universes of DMX across the network. | Multiple Transceivers can be set up to work together and distribute up to 64 universes of DMX across the network. | ||
| − | The DMX-512 Transceiver | + | The DMX-512 Transceiver has to be set to use the TCP/IP protocol. |
[[File:IO Server Kissbox Module.jpg|center]] | [[File:IO Server Kissbox Module.jpg|center]] | ||
Latest revision as of 07:47, 24 August 2020
KissBox DMX-512 is a Ethernet DMX adapter that allows HSYCO to control any DMX-512 standard bus.
Multiple Transceivers can be set up to work together and distribute up to 64 universes of DMX across the network. The DMX-512 Transceiver has to be set to use the TCP/IP protocol.
Check the KissBox site for additional information.
Connections
The KissBox DMX-512 connects to an Ethernet port on HSYCO Server, and is powered through the Ethernet, so there is no need for an external power supply.
You can connect multiple KissBox DMX-512 devices or other DMX controllers to an HSYCO Server.
HSYCO Configuration
Add a DMX Gateway in the DMX Gateway section of the Settings and set its parameters:
Communication
- IP Address: IP address of the KissBox DMX-512
- IP Port: TCP/IP port to use.
Once the KissBox is configured in the DMX Gateway of System Settings, you will be able to control the DMX-512 bus as with any other supported DMX controller on HSYCO.
Release Notes
3.1.0
- initial release
KissBox DMX-512 is a registered trademark of Kissbox.
