Difference between revisions of "Wolf8Access Utility"
| Line 6: | Line 6: | ||
| − | [[File: | + | [[File:Wolf8Access_Utility_menu.png|border|600px|center|Clients discovery]] |
From the list, click on each client to add, edit and save its configuration. | From the list, click on each client to add, edit and save its configuration. | ||
| − | [[File: | + | [[File:Wolf8Access_Utility_config.png|thumb|400px|Client configuration]] |
'''Parameters''': | '''Parameters''': | ||
Revision as of 15:40, 1 October 2021
The MQTTBroker Utility application provides a graphical interface to configure a MQTTBROKER I/O Server. When a MQTTBROKER I/O Server is defined in HSYCO, the MQTTBroker Utility will appear among the applications of the manager.
To configure MQTT clients to be used with HSYCO, enable auto-discovery ("Auto-discovery" checkbox). MQTT clients transmitting will appear in the list:
From the list, click on each client to add, edit and save its configuration.
Parameters:
- ID: the ID to assign to the client. It cannot be empty. The default value corresponds to the IP address of the client
- Username: client's username
- Password: client's password
To manually add a device click on the "+" button at the bottom-left corner of the page.
To remove a device, click on it from the list, click on "Delete" and confirm. If the auto-discovery is enabled, the device will reappear upon the next received frame from it.
Disable the auto-discovery when all the required devices have been configured.
The devices list shows the following fields:
- ID: ID of the device
- Online: connection status of the client with the MQTT broker
- Last seen: date and time of the last received valid frame
Committing the configuration
When all clients are configured, click on the "Commit" button on the top-right corner of the main page. The configuration will be persisted and the MQTTBroker I/O Server will restart with the new configuration.
