Difference between revisions of "SamsungTV"
| Line 30: | Line 30: | ||
You can easily associate any user button to a specific command to be sent to the TV. Set ''name'' to the I/O Server name and ''param'' to the command code. | You can easily associate any user button to a specific command to be sent to the TV. Set ''name'' to the I/O Server name and ''param'' to the command code. | ||
| − | [[File:IO Server SamsungTV Interface.png | + | [[File:IO Server SamsungTV Interface.png]] |
You can also enable the Repeat mode, so that multiple commands will be sent to the TV while the button is pressed. | You can also enable the Repeat mode, so that multiple commands will be sent to the TV while the button is pressed. | ||
Revision as of 16:03, 19 March 2014
The Samsung Smart TV driver for HSYCO allows you to control most recent Smart TV models from HSYCO web interfaces and application logic.
The driver can send most of the remote control commands, and a few extra commands not present on the remote, but can’t turn on a TV. The driver is basically one-way, it sends commands but doesn’t have any information of the current state of the TV, it only knows if the TV is on and can accept commands from HSYCO.
When you initially configure the Smart TV I/O server in HSYCO and the server restarts, you should have your TV on. The TV will then show a message asking to accept connections from HSYCO.
Datapoints
| ID | Value | R/W | Description |
|---|---|---|---|
| send | <command code> | W | send control command |
User Interface
You can easily associate any user button to a specific command to be sent to the TV. Set name to the I/O Server name and param to the command code.
You can also enable the Repeat mode, so that multiple commands will be sent to the TV while the button is pressed.
See the list of available commands in the table below.
Smart TV Control
Most Samsung Smart TV models should accept the following commands. Other undocumented commands may also be supported.
| Command code | Description |
|---|---|
| 0 | 0 |
| 1 | 1 |
| 2 | 2 |
| 3 | 3 |
| 4 | 4 |
| 5 | 5 |
| 6 | 6 |
| 7 | 7 |
| 8 | 8 |
| 9 | 9 |
| UP | up |
| DOWN | down |
| LEFT | left |
| RIGHT | right |
| ENTER | enter |
| INFO | info |
| EXIT | exit |
| RETURN | return |
| MENU | menu |
| TOOLS | tools |
| SOURCE | source |
| VOLUP | increase volume |
| VOLDOWN | decrease volume |
| MUTE | mute |
| CHUP | next channel |
| CHDOWN | previous channel |
| TV | select the internal TV tuner source |
| HDMI | select one of the HDMI sources (depends on the TV model) |
| POWEROFF | turn TV off (can’t turn it back on) |
| PIP_ONOFF | picture-in-picture on/off |
| PIP_CHDOWN | next channel in PIP window |
| PIP_CHUP | previous channel in PIP window |
| PIP_SWAP | swaps PIP and main screen sources |
Release Notes
3.3.0
- initial release version
Samsung and Samsung Smart TV are either trademarks or registered trademarks of Samsung Electronics Co., Ltd.
