Difference between revisions of "XGenConnect"

From HSYCO
Jump to navigation Jump to search
Line 188: Line 188:
 
|R
 
|R
 
|area n is ready to be armed
 
|area n is ready to be armed
−
 
−
|-
 
−
 
−
|rowspan="2" |a<n>.armed.ready.forced
 
−
|0
 
−
|R
 
−
|area n is not forced to be ready
 
−
|-
 
−
|1
 
−
|R
 
−
|area n is forced to be ready
 
  
 
|-
 
|-
Line 254: Line 243:
 
|R
 
|R
 
|entry delay is enabled for area n
 
|entry delay is enabled for area n
−
 
−
|-
 
−
 
−
|rowspan="2" |a<n>.nodelay
 
−
|0
 
−
|R
 
−
|no delay unset for area n
 
−
|-
 
−
|1
 
−
|R
 
−
|no delay set for area n
 
  
 
|-
 
|-
Line 312: Line 290:
 
|-
 
|-
  
−
|rowspan="2" |a<n>.window.abort
+
|rowspan="2" |a<n>.nightmode
−
|0
 
−
|R
 
−
|no abort window set for area n
 
−
|-
 
−
|1
 
−
|R
 
−
|abort window set for area n
 
−
 
 
−
|-
 
−
 
 
−
|rowspan="2" |a<n>.window.cancel
 
−
|0
 
−
|R
 
−
|no cancel window set for area n
 
−
|-
 
−
|1
 
−
|R
 
−
|cancel window set for area n
 
−
 
 
−
|-
 
−
 
 
−
|rowspan="2" |a<n>.alarm.openafter
 
−
|0
 
−
|R
 
−
|no open after alarm set for area n
 
−
|-
 
−
|1
 
−
|R
 
−
|open after alarm set for area n
 
−
 
 
−
|-
 
−
 
 
−
|rowspan="2" |a<n>.delay.holdup.abort
 
 
|0
 
|0
 
|R
 
|R
−
|no holdup abort delay set for area n
+
|no night mode set for area n
 
|-
 
|-
 
|1
 
|1
 
|R
 
|R
−
|holdup abort delay set for area n
+
|night mode set for area n
  
 
|-
 
|-
  
−
|rowspan="2" |a<n>.siren.fire
+
|rowspan="2" |a<n>.zones.bypassed
 
|0
 
|0
 
|R
 
|R
−
|no fire siren set for area n
+
|no zone (or zones) bypassed in area n
 
|-
 
|-
 
|1
 
|1
 
|R
 
|R
−
|fire siren set for area n
+
|zone (or zones) bypassed in area n
  
 
|-
 
|-
  
−
|rowspan="2" |a<n>.siren.nofire
+
|rowspan="2" |a<n>.zones.trouble
 
|0
 
|0
 
|R
 
|R
−
|no non-fire siren set for area n
+
|no zone (or zones) in trouble in area n
 
|-
 
|-
 
|1
 
|1
 
|R
 
|R
−
|non-fire siren set for area n
+
|zone (or zones) in trouble in area n
  
 
|-
 
|-
  
−
|rowspan="2" |a<n>.chime.on
+
|rowspan="2" |a<n>.zones.tamper
 
|0
 
|0
 
|R
 
|R
−
|no chime set for area n
+
|no zone (or zones) in tampering in area n
 
|-
 
|-
 
|1
 
|1
 
|R
 
|R
−
|chime set for area n
+
|zone (or zones) in tampering in area n
  
 
|-
 
|-
  
−
|rowspan="2" |a<n>.codepadsounder
+
|rowspan="2" |a<n>.zones.lowbattery
 
|0
 
|0
 
|R
 
|R
−
|no code pad sounder set for area n
+
|no zone (or zones) low battery in area n
 
|-
 
|-
 
|1
 
|1
 
|R
 
|R
−
|code pad sounder set for area n
+
|zone (or zones) low battery in area n
  
 
|-
 
|-
  
−
|rowspan="2" |a<n>.exit.silent
+
|rowspan="2" |a<n>.zones.lost
 
|0
 
|0
 
|R
 
|R
−
|no silent exit set for area n
+
|no zone (or zones) lost in area n
 
|-
 
|-
 
|1
 
|1
 
|R
 
|R
−
|silent exit set for area n
+
|zone (or zones) lost in area n
  
 
|-
 
|-
  
−
|rowspan="2" |a<n>.timing.twintrip
+
|a<n>.name
−
|0
+
|<text>
−
|R
 
−
|no twin trip timing set for area n
 
−
|-
 
−
|1
 
 
|R
 
|R
−
|twin trip timing set for area n
+
|name given to area n
  
 
|}
 
|}

Revision as of 10:40, 1 April 2021

The xGen Connect is a multi area anti-intrusion system.

Communication

  • IP Address: host name or IP address of the panel
  • IP Port: TCP/IP port assigned to the panel's web server

Authentication

  • User: username to access the web server
  • Password: password to access the web server

Options

ID Default Values Description
startupevents false true generate IO events also during the driver’s start-up phase
false start generating events only after HSYCO is aligned with the current status of the system
gui true true enable the UISET "visible" field for all system zones
false disable the UISET "visible" field for all system zones
pollinterval 1000 n > 1000 the data acquisition interval, in milliseconds
logsize 300 n ≥ 0 the number of log lines to display in the UI object


Datapoints

ID Value R/W Description
connection online R connection established
offline R HSYCO can't connect to the panel
system.status <text> R a list of system status which is supposed be to displayed on panel main screen
area.<k>.<n> 0 W turn off area n, of bank k
1 W turn on area n, of bank k, to the partial level
2 W turn on area n, of bank k, to the away level
3 W start or restart the exit delay in area n, of bank k
4 W mute status but leave armed area n, of bank k
5 W mute area n, of bank k, which is currently in exit delay
6 W bypass the group specified by HPD
7 W manual fire alarm
8 W manual panic alarm
9 W manual medical alarm
10 W global chime on
11 W global chime off
12 W start fire siren
13 W start non-fire siren
14 W restart auto-arm timer
15 W turn on area n, of bank k, to the away level and cancel any auto stay level
16 W turn off area n, of bank k, but chirps siren
17 W turn on area n, of bank k, to the away level but chirps siren
18 W turn on area n, of bank k, to the stay level but chirps siren
19 W turn keypad sound on
20 W manual silent panic
21 W manual audible panic
area.<k>.all {0...20} W apply the command {0...20}, as specified for a single area, to all areas
a<n>.armed.ready 0 R area n not enabled
1 R area n is ready to be armed
a<n>.armed.partial 0 R area n is not armed partially
1 R area n is armed partially
a<n>.armed.away 0 R area n not armed away
1 R area n is armed away
a<n>.delay.1.exit 0 R exit delay 1 is not enabled for area n
1 R exit delay 1 is enabled for area n
a<n>.delay.2.exit 0 R exit delay 2 is not enabled for area n
1 R exit delay 2 is enabled for area n
a<n>.delay.entry 0 R entry delay is not enabled for area n
1 R entry delay is enabled for area n
a<n>.alarm.fire 0 R no fire alarm for area n
1 R fire alarm for area n
a<n>.alarm.panic 0 R no panic alarm for area n
1 R panic alarm for area n
a<n>.alarm.burg 0 R no burg alarm for area n
1 R burg alarm for area n
a<n>.alarm.medic 0 R no medic alarm for area n
1 R medic alarm for area n
a<n>.nightmode 0 R no night mode set for area n
1 R night mode set for area n
a<n>.zones.bypassed 0 R no zone (or zones) bypassed in area n
1 R zone (or zones) bypassed in area n
a<n>.zones.trouble 0 R no zone (or zones) in trouble in area n
1 R zone (or zones) in trouble in area n
a<n>.zones.tamper 0 R no zone (or zones) in tampering in area n
1 R zone (or zones) in tampering in area n
a<n>.zones.lowbattery 0 R no zone (or zones) low battery in area n
1 R zone (or zones) low battery in area n
a<n>.zones.lost 0 R no zone (or zones) lost in area n
1 R zone (or zones) lost in area n
a<n>.name <text> R name given to area n


UISET Actions

ID Attribute Set to
log value latest security log lines (as many as specified by the 'logsize' option)

Log Files

If a XGenConnect I/O Server is connected to HSYCO, the security.log file will be written in the same directories as the daily log files.

This file is never overwritten or deleted from HSYCO SERVER. 

2021.03.31 11:27:06.504 - xgen - HSYCO ONLINE
2021.03.31 11:28:23.954 - xgen - Attiva modalità parziale**  Area 1  User 1  Ora: 11:28:23   Data: 31 Mar 2021
2021.03.31 11:28:23.989 - xgen - Allarme*  Area 1  Ora: 11:28:23   Data: 31 Mar 2021
2021.03.31 11:28:25.733 - xgen - Chiusura recente*  Area 1  User 1  Ora: 11:28:23   Data: 31 Mar 2021
2021.03.31 11:28:25.751 - xgen - Allarme*  Porta ingresso  Area 1  Ora: 11:28:23   Data: 31 Mar 2021
2021.03.31 11:29:23.749 - xgen - Ripristino allarme*  Porta ingresso  Area 1  Ora: 11:29:23   Data: 31 Mar 2021
2021.03.31 11:29:23.772 - xgen - Disattiva modalità parziale**  Area 1  User 1  Ora: 11:29:23   Data: 31 Mar 2021

Other information about the TLABQ driver are stored in the message.log daily file.

Release Notes

3.8.0

  • initial release


Hesa is a registered trademarks of Hesa S.p.A.

Retrieved from "https://wiki.hsyco.com/3.8/index.php?title=XGenConnect&oldid=9847"