XGenConnect

From HSYCO
Jump to navigation Jump to search

The xGen Connect is a multi area anti-intrusion system.

HSYCO Configuration

Add the XGENCONNECT I/O Server in the I/O Servers section of the Settings and set its parameters:

Communication

  • IP Address: host name or IP address of the panel
  • IP Port: TCP/IP port assigned to the panel's web server

Authentication

  • User: username to access the web server
  • Password: password to access the web server

Options

ID Default Values Description
startupevents false true generate IO events also during the driver’s start-up phase
false start generating events only after HSYCO is aligned with the current status of the system
gui true true enable the UISET "visible" field for all system zones
false disable the UISET "visible" field for all system zones
pollinterval 1000 n > 1000 the data acquisition interval, in milliseconds
logsize 300 n ≥ 0 the number of log lines to display in the UI object
maxareas 8 1≤n≤16 max number of areas that are configured in the security panel

Datapoints

ID Value R/W Description
connection online R connection established
offline R HSYCO can't connect to the panel
system.status <text> R a list of system status which is supposed be to displayed on panel main screen
area.<0,1>.<n> 0 W turn off area n, of bank 0 (areas 1-8) or 1 (areas 9-16)
1 W turn on area n, of bank 0 (areas 1-8) or 1 (areas 9-16), to the partial level
2 W turn on area n, of bank 0 (areas 1-8) or 1 (areas 9-16), to the away level
3 W start or restart the exit delay in area n, of bank 0 (areas 1-8) or 1 (areas 9-16)
4 W mute status but leave armed area n, of bank 0 (areas 1-8) or 1 (areas 9-16)
5 W mute area n, of bank 0 (areas 1-8) or 1 (areas 9-16), which is currently in exit delay
6 W bypass the group specified by HPD
7 W manual fire alarm
8 W manual panic alarm
9 W manual medical alarm
10 W global chime on
11 W global chime off
12 W start fire siren
13 W start non-fire siren
14 W restart auto-arm timer
15 W turn on area n, of bank 0 (areas 1-8) or 1 (areas 9-16), to the away level and cancel any auto stay level
16 W turn off area n, of bank 0 (areas 1-8) or 1 (areas 9-16), but chirps siren
17 W turn on area n, of bank 0 (areas 1-8) or 1 (areas 9-16), to the away level but chirps siren
18 W turn on area n, of bank 0 (areas 1-8) or 1 (areas 9-16), to the stay level but chirps siren
19 W turn keypad sound on
20 W manual silent panic
21 W manual audible panic
area.<0,1>.all {0...21} W apply the command {0...21}, as specified for a single area, to all areas of bank 0 (areas 1-8) or 1 (areas 9-16)
a<n>.armed.ready 0 R area n not enabled
1 R area n is ready to be armed
a<n>.armed.partial 0 R area n is not armed partially
1 R area n is armed partially
a<n>.armed.away 0 R area n not armed away
1 R area n is armed away
a<n>.delay.1.exit 0 R exit delay 1 is not enabled for area n
1 R exit delay 1 is enabled for area n
a<n>.delay.2.exit 0 R exit delay 2 is not enabled for area n
1 R exit delay 2 is enabled for area n
a<n>.delay.entry 0 R entry delay is not enabled for area n
1 R entry delay is enabled for area n
a<n>.alarm.fire 0 R no fire alarm for area n
1 R fire alarm for area n
a<n>.alarm.panic 0 R no panic alarm for area n
1 R panic alarm for area n
a<n>.alarm.burg 0 R no burg alarm for area n
1 R burg alarm for area n
a<n>.alarm.medic 0 R no medic alarm for area n
1 R medic alarm for area n
a<n>.nightmode 0 R no night mode set for area n
1 R night mode set for area n
a<n>.zones.bypassed 0 R no zone (or zones) bypassed in area n
1 R zone (or zones) bypassed in area n
a<n>.zones.trouble 0 R no zone (or zones) in trouble in area n
1 R zone (or zones) in trouble in area n
a<n>.zones.tamper 0 R no zone (or zones) in tampering in area n
1 R zone (or zones) in tampering in area n
a<n>.zones.lowbattery 0 R no zone (or zones) low battery in area n
1 R zone (or zones) low battery in area n
a<n>.zones.lost 0 R no zone (or zones) lost in area n
1 R zone (or zones) lost in area n
a<n>.name <text> R name given to area n
z<n>.open 0 R zone n not open
1 R zone n open
z<n>.tamper 0 R zone n not in tampering
1 R zone n in tampering
z<n>.trouble 0 R zone n not in trouble
1 R zone n in trouble
z<n>.bypass 0 R zone n not bypassed
1 R zone n bypassed
z<n>.inhibited 0 R zone n not inhibited
1 R zone n inhibited
z<n>.alarm 0 R zone n not in alarm
1 R zone n in alarm
z<n>.lowbatt 0 R zone n not low battery
1 R zone n low battery
z<n>.supervision 0 R zone n not in supervision
1 R zone n in supervision
z<n>.alarm.mem 0 R zone n not in alarm memory
1 R zone n in alarm memory
z<n>.activity.fail 0 R zone n no activity fail
1 R zone n activity fail
z<n>.name <text> R name given to zone n
zone.<n>.5 0 W not update bypass state of zone n
1 W update bypass state of zone n
zone.<n>.6 0 W not update chime state of zone n
1 W update chime state of zone n
sensor.<n>.name <text> R name given to sensor n
scene.<n>.name <text> R name given to scene n
camera.trigger {1...16} W trigger clip on camera with the specified index
scene.trigger {1...16} W trigger scene with the specified index


User Interface

XGenConnect Object

The user interface for the XGenConnect multi-area intrusion detection system:

XGenConnect UI Object 1.png XGenConnect UI Object 2.png XGenConnect UI Object 3.png

The first image shows the list of configured areas. You can set the alarm to partial level or away level for all the areas, otherwise you can open a popup on a dedicated area and set the alarm level only for that one. The two icons on the top of the page represent in order: area tamper (at least one area is in tamper state), area alarm (at least one area is in alarm state).

The second image shows the popup associated to a zone; the five icons shown inside the popup represent in order: zone open, zone alarm, zone tamper, zone bypassed, zone chime. Inside the popup you can bypass/unbypass the selected zone and you can activate/deactivate the zone chime.

The (xgenconnect) object is listed in the Project Editor’s new object list only when at least one XGenConnect I/O Server is defined

Parameters

  • server id: the server ID. Supports Redirect variables
  • position: the object's position. Use the pixels or rows and columns coordinates format

Syntax

(xgenconnect <server id>; <position>)

E.g.

(xgenconnect xgen; x10y20)

UISET Actions

ID Attribute Set to
log <text> latest security log lines (as many as specified by the 'logsize' option)
log0 <text> latest security log (it will vanish after 5 seconds)
z<n>.open visible false zone n not open
true zone n open
z<n>.tamper visible false zone n not in tampering
true zone n in tampering
z<n>.trouble visible false zone n not in trouble
true zone n in trouble
z<n>.bypass visible false zone n not bypassed
true zone n bypassed
z<n>.inhibited visible false zone n not inhibited
true zone n inhibited
z<n>.alarm visible false zone n not in alarm
true zone n in alarm
z<n>.lowbatt visible false zone n not low battery
true zone n low battery
z<n>.supervision visible false zone n not in supervision
true zone n in supervision
z<n>.alarm.mem visible false zone n not in alarm memory
true zone n in alarm memory
z<n>.activity.fail visible false zone n no activity fail
true zone n activity fail

Log Files

If a XGENCONNECT I/O Server is connected to HSYCO, the security.log file will be written in the same directories as the daily log files.

This file is never overwritten or deleted from HSYCO SERVER.

2021.03.31 11:27:06.504 - xgen - HSYCO ONLINE
2021.03.31 11:28:23.954 - xgen - Attiva modalità parziale**  Area 1  User 1  Ora: 11:28:23   Data: 31 Mar 2021
2021.03.31 11:28:23.989 - xgen - Allarme*  Area 1  Ora: 11:28:23   Data: 31 Mar 2021
2021.03.31 11:28:25.733 - xgen - Chiusura recente*  Area 1  User 1  Ora: 11:28:23   Data: 31 Mar 2021
2021.03.31 11:28:25.751 - xgen - Allarme*  Porta ingresso  Area 1  Ora: 11:28:23   Data: 31 Mar 2021
2021.03.31 11:29:23.749 - xgen - Ripristino allarme*  Porta ingresso  Area 1  Ora: 11:29:23   Data: 31 Mar 2021
2021.03.31 11:29:23.772 - xgen - Disattiva modalità parziale**  Area 1  User 1  Ora: 11:29:23   Data: 31 Mar 2021

Other information about the XGENCONNECT driver are stored in the message.log daily file.

Release Notes

3.8.0

  • initial release


Hesa is a registered trademarks of Hesa S.p.A.