XGenConnect (I/O Server Object)

The user interface for the XGenConnect multi-area intrusion detection system:

The firs image shows the list of configured areas. You can set the alarm to partial level or away level for all the areas, otherwise you can open a popup on a dedicated area and set the alarm level only for that one. The two icons on the top of the page represent in order: area tamper (at least one area is in tamper state), area alarm (at least one area is in alarm state). The second image is shows the popup associated to a zone; the five icons shown inside the popup represent in order: zone open, zone alarm, zone tamper, zone bypassed, zone chime.

The (xgenconnect) object is listed in the Project Editor’s new object list only when at least one XGenConnect I/O Server is defined

For further details refer to the XGenConnect I/O Server Application Note.

Parameters

• server id: the server ID. Supports Redirect variables
• position: the object's position. Use the pixels or rows and columns coordinates format

Syntax

(xgenconnect <server id>; <position>)

E.g.

(xgenconnect xgen; x10y20)