Lares4 (I/O Server Object)

The user interface for the Lares4 multi-area intrusion detection system:

The first image shows the list of configured partitions. You can set the alarm for all the partitions, otherwise you can open a popup on a dedicated partition and set the alarm only for that one. The two icons on the top of the page represent in order: partition tamper (at least one partition is in tamper state), partition alarm (at least one partition is in alarm state).

The second image shows the popup associated to a zone; the five icons shown inside the popup represent in order: zone open, zone alarm, zone tamper, zone bypassed, zone chime. Inside the popup you can bypass/unbypass the selected zone and you can activate/deactivate the zone chime.

The (lares4) object is listed in the Project Editor’s new object list only when at least one Lares4 I/O Server is defined

For further details refer to the Lares4 I/O Server Application Note.

Parameters

• server id: the server ID. Supports Redirect variables
• position: the object's position. Use the pixels or rows and columns coordinates format

Syntax

(lares4 <server id>; <position>)

E.g.

(lares4 lares; x10y20)