Manager
Jump to navigation
Jump to search
The Manager is the Web-based toolkit of applications that you will use to create customized graphic user interfaces and access all system's configuration files.
The Manager runs on most modern Web browsers, including tablets like Apple’s iPad. It also runs on small screen devices like the iPhone or iPod touch, although a larger screen size is advisable for ease of use. Microsoft’s Internet Explorer versions 8 and older are not supported, and IE9 is not guaranteed to work, although it should in most cases.
To access the Manager, enter the following URL in your Web Browser:
https://192.168.0.50/hsycoserver/manager
You need to authenticate using a PIN with administrator privileges to use the Manager.
The Manager has several applications:
Settings - to configure the HSYCO system.
Admin - for basic user and network settings.
Project Editor - the visual editor used to create the user interfaces.
File Manager - provides access to all HSYCO's files, just like the standard file manager you have in your personal computer, only this one is fully Web-based and works directly on HSYCO Server's files.
Log Viewer - a real-time viewer of HSYCO's logs.
Status Browser - a real-time viewer of data points, variables and dynamic user interface attributes.
System Monitor - used to monitor several key hardware and operating system parameter of the HSYCO server.
Wiring Editor - an easy to use end-user logic and scenarios builder.
Modbus Utility - accessible if the Modbus I/O server is enabled
KNX Utility - accessible if the KNX I/O server is enabled
BACnet Utility - accessible if the BACnet I/O server is enabled
LoRaWAN Utility - accessible if the LoRaWAN I/O server is enabled
SSH Tunnel Utility - SSH reverse tunnel configuration
Heos Utility - accessible if the Heos I/O server is enabled
You can switch between applications from any application using the 
button on the top bar.
Using a PC with a physical keyboard, you can also press [Ctrl] and [Shift] at the same time for fast switching between applications. An application selection panel appears until you keep the [Ctrl] key pressed; select the application you need by repeatedly pressing [Shift], then releasing [Ctrl].
